Publicidad
Idiomas disponibles
Idiomas disponibles
11.2 Malfunction messages appearing on the display
Display message
Power Failure!!
Door Fridge OPEN
Fresh Zone OPEN
Replace filter
Fridge too warm
Fridge too cold
Fresh Zone too warm
Fresh Zone too cold
Error Code...
Check condenser
>
In case of errors, touch the button Alarm
number code.
>
The message will be shown for 3 seconds, then it will go back to the home screen.
>
For longer viewing of the message on the screen, navigate to the INFORMATION menu item
sage will be on the screen for 30 seconds, then it will go back to the home screen.
>
In the case there is more than one error message, the display will show each message in sequence.
Malfunction description
Prolonged interruption of electrical power
the appliance resumes work automatically, the display shows the warmest
temperatures achieved
Fridge door open
the message appears after few minutes from the door opening
Freezer door open
the message appears after few minutes from the door opening
Replace filter cartridge
message appears when only 30% of filter capacity is left
Fridge too warm
see Troubleshooting Guide
Fridge too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Freezer too warm
see Troubleshooting Guide
Freezer too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Functional problems
call Customer Care who may help you to salve the problem or put you in
contact with the nearest Service Agent
Check Condenser
Every 12 months the display shows the message "Check Cond", clean the
condenser and follow the prompts for resetting or disabling the reminder.
and the display will show the error message with its error
EN
Vuoi attivare
(
). The mes-
la modalità
COOLER BOTTIGLIE?
Sì
No
43
Publicidad
