Philips AUT4030R400 Manual Del Usuario página 11

b. Pull out the silicone plugs of the water inlet
and outlet holes on the top of the system.
c. Connect the water inlet and the three-way ball valve.
Measure the length of the 1/4" pipe you need to connect the system and the
three-way ball valve, and cut it accordingly with a pipe cutter. Insert the other end of
the 1/4" pipe which has been connected with the three-way ball valve into the water
inlet hole on the top of the system. Use a clip to secure the pipe at the hole.
d. Connect the water outlets and the faucet.
Measure the length of the 1/4" pipe you need to connect the system and the faucet,
cut the 1/4" pipe with a pipe cutter. Insert one end of the pipe into the quick connector
which has been connected with the puri�ed water inlet pipe (white) of the faucet.
Insert the other end of the pipe into the puri�ed water outlet hole on the top of the
system till the bottom. Use quick connector clips to secure the pipes.
Cut another 1/4"pipe with the pipe cutter. Insert one end of the pipe into the quick
connector which has been connected with the �ltered water inlet pipe (yellow) of the
faucet. Insert the other end of the pipe into the �ltered water outlet hole on the top of
the system till the bottom. Use quick connector clips to secure the pipes.
Handle
Puri�ed water inlet pipe
Quick connector
Filtered water inlet pipe
quick connector clip
8