Philips AUT4030R400 Manual Del Usuario página 9

c. Install the three-way ball valve on the cold water valve.
Please don't miss the gasket inside the three-way ball
valve during installation.
d. Connect the cold water hose with the
three-way ball valve and screw it tightly with
a wrench. Please don't miss the gasket in the
cold water hose during installation.
e. Switch off the three-way ball valve. Turn on
the cold water supply. Wipe the connections
with a tissue to see if there is leakage. If the
tissue stays dry, it means the three-way ball
valve is installed properly.
Gasket
Gasket
6
(1)
(2)
(1)
(2)
Hot Cold
(1)
(2)