Philips AUT4030R400 Manual Del Usuario página 14

b. After the auto-�ush is completed, turn on the puri�ed water (rotate the handle of the
faucet anticlockwise) to allow water to run for 15 minutes. After that, switch off the
faucet for at least 10 seconds, and then turn on the puri�ed water again for another 15
minutes, which is for �ushing the air and carbon �nes through the �lters. After that,
the system is ready and you can start to enjoy both puri�ed and �ltered water.
2. User interface
4
a. Operation status indicator:
Status
Normal operation
Flushing
Error
Standby
Puri�ed
water
1
5
2
3
Operation status indicator
1
RO �lter lifetime indicator
2
3in1 �lter lifetime indicator
3
Reset button
4
Flush button
5
Indicator
Constant blue light
Flashing blue light
Flashing red light
Off
11
Filtered
water