Publicidad
Idiomas disponibles
Idiomas disponibles
1. Preparations before installation
Choose a suitable position to install the system;
Make sure there is power socket near the installation position;
Check the packing list and make sure you have all the accessories on the list;
Prepare necessary tools for installation:
PTFE tape
Screwdriver
2. Installing the three-way ball valve
a. Turn off the cold water supply. Turn on the kitchen cold water faucet to release the
pressure and allow water to drain from the line. Disconnect the cold water hose from
the cold water valve.
Hot
b. Insert the nut of the three-way ball valve onto the 1/4" PE pipe and insert the pipe
into the convex connector of the three-way ball valve. Tighten the nut with a wrench.
Wrench
Cold
Pipe cutter
Flashlight
Cold
(1)
(2)
5
Rag
Electric drill
Publicidad
