Publicidad
Idiomas disponibles
Idiomas disponibles
** When the inlet water pressure exceeds 0.4 MPa, a pressure relief valve should be
installed before the system. When the inlet water pressure is below 0.1 MPa, a
pressure booster should be installed before the system. The pressure relief valve is
included in the accessories bag and the pressure booster needs to be purchased
separately.
*** If the salinity of inlet water exceeds 1500 ppm, or the hardness exceeds 15 °fH, the
lifetime of the �lters may be impacted. Please consult with your dealer about install-
ing pre�lters before the system.
III. Product overview and installation illustration
2
1
3
Front cover
1
3in1 �lter
2
RO �lter
3
Main unit
4
Faucet
5
Quick connector
6
4
5
Three-way ball valve
7
Quick connector clip
8
1/4''PE pipe (white)
9
Power adaptor
10
Pressure relief valve
11
Drain connector
12
3
x2
x8
6
7
8
9
10
11
12
Publicidad
