Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1
Safety
Warning indications
Where applicable, the following warning indications are used in this
manual in connection with safety:
Indicates that great potential danger exists that can lead to serious
injury or death.
Indicates that a potential danger that can lead to injury exists.
Indicates that the usage procedures, actions etc. concerned can re-
sult in serious damage to or destruction of the engine. Some CAU-
TION indications also advise that a potential danger exists that can
lead to serious injury or death.
Emphasises important procedures, circumstances etc.
Symbols
Indicates that the relevant procedure must be carried out.
Indicates that a particular action is forbidden.
Share these safety instructions with all users.
General rules and laws concerning safety and accident prevention
must always be observed.
This product should only be installed and maintained by
qualified personnel who have read and understood the in-
structions and precautions in this manual. Failure to follow
the instructions in this manual may result in serious injury or
property damage. The manufacturer shall not be liable for any
damages resulting from improper installation or maintenance
by unqualified personnel.
This product should only be operated by persons who have
read and understood the instructions and precautions in this
manual. Failure to follow the instructions in this manual may
result in serious injury or property damage. The manufacturer
shall not be liable for any damages resulting from improper
operation.
6
090444.01
D
anGer
W
arninG
c
aution
n
ote
W
arninG
W
arninG
2
Introduction
This manual provides guidelines for the installation and use of the
VETUS MPA34CANBS CAN-bus motor panel.
1000
0
The panel has a built-in audible alarm and can be used as a single,
first or second, panel.
Check the supply voltage of your system and choose the
right panel:
MPA34CANBS2 - 12 Volt DC
MPA34CANBS4 - 24 Volt DC
The CAN bus supply voltage is always 12 volts.
The quality of the installation is decisive for the proper functioning of
the system. Almost all faults can be traced back to errors or inaccura-
cies during installation. It is therefore imperative that the steps given
in the installation instructions are followed in full during the installa-
tion process and checked afterward.
Unauthorised modifications shall exclude the liability of the manu-
facturer for any resulting damage.
Never work on the electrical system while it is energized.
Only work on the system with the engine stopped.
12
14
10
8
16
2000
3000
VOLT
4000
5000
n
ote
c
aution
W
arninG
D
anGer
Engine control panel MPA34CANBS
Publicidad
