Descargar Imprimir esta página

Husqvarna ST 424 Manual De Usuario página 12

Ocultar thumbs Ver también para ST 424:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
(Fig. 13)
Remove key before maintenance.
(Fig. 14)
Remove spark plug cable before
maintenance.
(Fig. 15)
Hot surface.
(Fig. 16)
Risk of fire.
(Fig. 17)
Beware of thrown objects.
(Fig. 18)
Keep distance to bystanders.
(Fig. 19)
Do not breathe in exhaust fumes.
(Fig. 20)
Move slowly rearward.
(Fig. 21)
Risk of falling.
(Fig. 22)
No operation on slopes more than 20
degrees.
(Fig. 23)
This product is in accordance with
applicable EC directives.
(Fig. 24)
This product conforms to applicable UK
regulations.
(Fig. 25)
Steer left.
(Fig. 26)
Steer right.
(Fig. 27)
Blower on.
Safety definitions
The definitions below give the level of severity for each
signal word.
WARNING:
CAUTION:
Note:
This information makes the product easier to
use.
General safety instructions
Use the product correctly. Injury or death is a
possible result of incorrect use. Only use the product
12
Injury to persons.
Damage to the product.
(Fig. 28)
Traction drive on.
(Fig. 29)
Ear protection recommended.
(Fig. 30)
Wear protection gloves.
(Fig. 49)
(Fig. 50)
(Fig. 51)
(Fig. 52)
Euro V Emissions
WARNING:
voids the EU type-approval of this product.
Product damage
We are not responsible for damages to our product if:
the product is incorrectly repaired.
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.
Safety
for the tasks found in this manual. Do not use the
product for other tasks.
Obey the instructions in this manual. Obey the safety
symbols and the safety instructions. If the operator
does not obey the instructions and the symbols,
injury, damage or death is a possible result.
Do not discard this manual. Use the instructions
to assemble, to operate and to keep your product
in good condition. Use the instructions for correct
installation of attachments and accessories. Only
use approved attachments and accessories.
Do not use a damaged product. Obey the
maintenance schedule. Only do the maintenance
work that you find an instruction about in this
manual. An approved service center must do all
other maintenance work.
This manual cannot include all situations that can
occur when you use the product. Be careful and use
your common sense. Do not operate the product or
do maintenance to the product if you are not sure
about of the situation. Speak to a product expert,
Change auger bucket
height.
Rotate left/rotate right.
Forward/reverse.
Up/down.
Tampering with the engine
876 - 019 - 05.10.2023

Publicidad

loading

Este manual también es adecuado para:

St 427St 430St 424tSt 427tSt 430t