Pari eBase Controller Instrucciones De Uso página 15

• Insert the inspiratory valve (6). When
doing so, check that the two valve flaps
are seated correctly. They must lie per-
fectly flush and face towards the aerosol
chamber following insertion.
6
• Close the aerosol chamber.
NOTE:
If the snap closure does not close,
ensure that the inspiratory valve is
seated correctly. It must lie flat against
the aerosol chamber.
• Attach the mouthpiece (7) to the aerosol
chamber.
®
eBase Controller - 2022-09
• Connect the connection cord (2) to the
nebuliser handset.
• Connect the connection cord (8) to the
controller.
7
2
8
11
en