GPI G8P Guía De Solución De Problemas página 6

MAINTENANCE ( CONTINUED )
Inspect and Service Gears
To clean and service gears (See Figure 2):
1.
2.
3.
4.
5.
Coverplate
O-Ring
Figure 2
6
EN
Remove the (4) 1/4-20 socket head screws, (2) hex nuts, handle and
gear coverplate.
Remove coverplate O-ring and inspect for wear or damage. Replace
as needed.
Before seating, coat O-rings with light grease.
Remove the gears and inspect for wear or damage. Replace gears as
needed, making sure they turn freely.
Reinstall coverplate, handle nuts, and hex screws (longer screws are
on top. Torque hex screws to 75-85 in/lbs.
Gears
Motorshaft Seal