Publicidad
Idiomas disponibles
Idiomas disponibles
[e] "J :I ,_:_ i[e] _I
This product will accept
Craftsman
C3 19.2V lithium-ion
battery
packs. For
complete
charging
instructions,
refer to the Operator's
Manual for the battery
packs and chargers.
WARNING:
To prevent accidental
starting
that could cause serious personal
injury, always remove the battery pack from the tool when assembling
parts,
making adjustments,
installing or removing
bits, cleaning,
or when it is not
in use.
TO ATTACH BATTERY
PACK (Fig. 2)
1.
Lock the trigger switch on
the drill/driver
by placing the
direction-of-rotation
(forward/
center-lock/reverse)
selector
in the center position.
2.
Align the raised rib on the
battery pack with the groove
inside the drill/driver,
and then
insert the battery pack into
the tool.
Fig. 2
NOTICE: Make sure that the latch on the battery pack snaps into place and
the battery pack is secured to the tool before beginning operation.
Improper
assembly
of the battery pack can cause damage to internal components.
TO DETACH BATTERY PACK (Fig. 2)
1.
Lock the trigger switch on the drill/driver
by placing the direction-of-rotation
selector
in the center position.
2.
Depress both battery-release
buttons,
located on the sides of the battery
pack, to release the battery pack.
3.
Pull the battery
pack out and remove it from the tool.
WARNING:
Battery tools are always in operating
condition.
Therefore,
the
direction-of-rotation
selector should
always be locked when the tool is not in use
or when carrying
the tool at your side.
12
Publicidad
