Publicidad
Idiomas disponibles
Idiomas disponibles
Keep cutting tools sharp and clean. Properly maintained
cutting
tools with
sharp cutting
edges are less likely to bind and are easier to control.
Use the power
tool, accessories,
tool bits, etc. in accordance
with
these
instructions,
taking
into account
the working
conditions
and the
work to be performed.
Use of the power tool for operations
different from
those intended could result in a hazardous
situation.
BATTERY TOOL USE AND CARE
•
Recharge
only with the charger
specified
by the manufacturer.
A
charger that is suitable for one type of battery pack may create a risk of fire
when used with another
battery pack.
•
Use power tools
only with specifically
designated
battery
packs.
Use of
any other battery packs may create a risk of injury and fire.
•
When battery
pack is not in use, keep it away from other
metal
objects,
like paper
clips, coins,
keys, nails, screws
or other small metal
objects
that can make
a connection
from one terminal
to another.
Shorting
the
battery terminals
together
may cause burns or a fire.
•
Under abusive
conditions,
liquid may be ejected
from the battery;
avoid
contact.
If contact
accidentally
occurs,
flush with water.
If liquid
contacts
eyes, additionally
seek medical
help. Liquid ejected from the
battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
Follow instructions
in the Maintenance
section of this manual.
Use of
unauthorized
parts or failure to follow Maintenance
instructions
may create
a risk of shock or injury.
SPECIFIC
SAFETY RULES FOR DRILL DRIVER
•
Know your drill/driver.
Read operator's
manual carefully.
Learn the
applications
and limitations,
as well as the specific potential
hazards related
to this tool. Following this rule will reduce the risk of electric
shock, fire or
serious injury.
•
Hold power
tools
by their
insulated
gripping
surfaces
when performing
an operation
where the cutting
tool may contact
hidden
wiring.
If a
cutting
accessory
contacts
a "live" wire, it may make exposed
metal parts
of the power tool "live" and could give the operator an electric
shock.
•
Use auxiliary handle(s), if supplied with the tool.
Loss of control can
cause personal injury.
Publicidad
