_,'%1 = q uk'i[,,,,_o_
The purpose of safety symbols
is to attract your attention to possible
dangers.
The safety symbols
and the explanations
with them deserve
your careful
attention
and understanding.
The symbol warnings
do not, by themselves,
eliminate
any danger. The instructions
and warnings
they give are no substitutes
for proper accident
prevention
measures.
WARNING:
Be sure to read and understand
all safety instructions
in this
manual, including
all safety alert symbols
such as "DANGER,"
"WARNING,"
and
"CAUTION"
before using this tool. Failure to follow all instructions
listed in this
manual may result in electric shock, fire, and/or serious personal injury.
SYMBOL
SIGNAL MEANING
SAFETY ALERT SYMBOL:
indicates
DANGER,
WARNING,
or CAUTION;
may
be used in conjunction
with other symbols
or pictographs.
DANGER:
Indicates
a hazardous
situation
which, if not avoided,
will result in
death or serious injury.
WARNING:
Indicates a hazardous
situation
which, if not avoided,
could
result in death or serious injury.
CAUTION:
Indicates a hazardous
situation
which, if not avoided,
could
result in minor or moderate
injury.
Damage prevention
and Information
Messages
These inform the user of important
information
and/or instructions
that could
Bead to equipment
or other property
damage
if they are not followed.
Each
message
is preceded
by the word "NOTICE",
as in the example
below.
NOTICE:
Equipment
and/or property
damage may result if these instructions
are
not followed.
WARNING:
To ensure safety and reliability,
all repairs should
be performed
by a qualified
service technician.
_,
WARNmNG: The operation
of any power tools can result in
foreign objects
being thrown
into your eyes, which can result
in severe eye damage.
Before beginning
power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend
a Wide
Vision Safety Mask for use over eyeglasses
or standard
safety
glasses with side shields. Always use eye protection
which is
marked to comply with ANSI Z87.1.