Publicidad
Idiomas disponibles
Idiomas disponibles
Responses for „STATUS"-command:
02 REMOTE STOP
03 REMOTE START
-08 INVALID
COMMAND
-10 VALUE TOO
SMALL
-11 VALUE TOO
LARGE
Responses for „STATUS"-command in case of alarm
Error cause
Low fluid level
Coolant supply
temperature sensor
failure
Coolant temperature
out of range, above
setpoint
Coolant temperature
out of range, below
setpoint
Any other alarms
Command entry format
All commands need bo transferred in ASCII-Code and to be terminated with
Carriage Return (HEX: 0x0D) and linefeed (HEX:0x0A).
Tempering stopped
Tempering started
The last command received by the chiller was unknown
The parameter of the last command was out of range.
Example:
If the chillers setpoint range is -5...40°C and "OUT_SP_00 -10.00" is
received (-10 VALUE TOO SMALL) or "OUT_SP_00 50.00" is received (-11
VALUE TOO LARGE).
Response
-01 ALARM: 1700001
-05 ALARM: 1700005
-201 ALARM:1700030
-14 ALARM: 1700003
-144 ALARM: 1700044
-999 ALARM: 1700099
Communications Interface
107
Publicidad
