Julabo Peltier TE400 Manual Del Operacion página 81

6.7 Storing the Unit
These storage conditions apply to the following:


Store the units as follows:




6.8 Preparing the Unit for Further Transport
For detailed information and specific instructions on how to prepare the unit,
refer to Safety Precautions.
6.8.1 Transporting the Unit (after use)
Requirements
 Unit is switched off and disconnected from the electrical power source
 Unit and coolant cooled to the ambient temperature
 Coolant is drained. Refer to Draining Procedure.
 Coolant hoses disconnected from the unit. Refer to Disconnect Hoses.
New units
Units that were already in operation but will be temporarily out of
operation. Refer to Temporary Placing Out of Operation.
Completely drained of coolant to prevent possible damage due to freezing.
Dry, dust-free environment, protected against direct sunlight
According to required storage temperature and relative humidity. Refer to
Specifications.
For storage that exceeds three months, it is recommended that the unit is
placed inside its original packaging.
NOTE
Risk of damage due to improper transportation
A coolant that has not been drained or packaging with inappropriate
dimensions may cause damage during transport.

Drain the coolant before transporting the unit. Refer to Draining
Procedure.

Use proper packaging.
Transport, Packaging and Storage
81