Ego Power+ SNT2120E-AP Manual página 12

EN
Required tools:
◾
13 mm open-end wrench (not included)
◾
5 mm hex wrench (supplied)
1. Wear gloves. Manually rotate the steel auger to
the appropriate position for easy rubber auger
disassembly.
2. Remove all securing bolts and nuts to take the rubber
augers out.
3. Replace them with the new rubber augers, and
securely tighten them.
STORING THE SNOW BLOWER
◾
Remove the battery pack(s) and store in a secure
location out of the reach of children.
Before storage, wipe any moisture, dirt, or debris
from and around the battery compartment.
◾
Wipe the snow blower with a clean dry cloth.
◾
Check all nuts, bolts, knobs, screws, etc., for tightness.
◾
Inspect moving parts for damage, breakage, and wear.
Have repairs made on any damaged or missing parts.
◾
Fold the side rails to the storage position.
◾
Store the snow blower in a clean, dry, enclosed place
out of the reach of children.
◾
Do not store near corrosive materials such as fertilizer
or rock salt.
FOLDING THE SIDE RAILS
1. Push the chute-rotation handle all the way forward so
that the chute is facing left, which will ensure causing
no interference when folding. Squeeze the trigger on
the chute deflector handle to tilt it all the way down
(Fig. H1).
2. Open the quick-release levers on both sides to fold the
side rails to the storage position (Fig. H2).
LIFTING AND CARRYING THE SNOW BLOWER
1. Remove the battery pack(s).
2. Fold the side rails as described in the previous chapter.
3. Lift and carry the unit by grabbing the lift handle with
one hand and the lift area, on top of the snow intake
(right below the EGO logo), with the other hand (Fig. I).
I-1 Lift area
12
56-VOLT LITHIUM-ION CORDLESS SNOW BLOWER — SNT2120E-AP
I-2 Lift handle
PROTECTING THE ENVIRONMENT
WEEE (Waste Electrical and Electronic
Equipment) Do not dispose of electrical
equipment, used battery and charger into
household waste! Take this product to an
authorized recycler and make it available
for separate collection. Electric tools must
be returned to an environmentally
compatible recycling facility.