geberit EFP 203 Manual página 25

Operation
Inserting Geberit pressing
attachments
Pressing attachments are pressing jaws,
pressing collars and adapter jaws.
Observe the user manuals of the
Geberit pressing attachments. Check
the pressing attachments according
to the safety chapter.
1
Disconnect the mains plug.
2
Turn the retaining pin by 180° to the
front and remove it.
3
Insert the pressing attachment into
the pressing tool.
36028798914619019 © 08-2022
968.393.00.0(01)
4
Push the retaining pin in until the
stop position is reached and turn it by
180° to the rear.
EN
25