IKRA IROM 600 Instrucciones De Manejo página 27

worn or damaged. Replace worn or damaged
blades and bolts in sets to maintain balance.
e) Care must be taken with multi-spindle
machines, as the rotation of one blade can
cause the rotation of other blades.
3) Operation - General
a) Never operate the machine with defective
guards or without guards fitted, such as
deflectors and/or grass catchers.
b) Do not place your hands or feet near or
under rotating parts. Always keep clear of the
discharge opening.
c) Never lift or carry the machine when the
engine is running.
d) Remove (or activate) the switch-off device
from the machine
- before clearing a blockage;
- before checking, cleaning or working on the
machine.
Additionally, if the machine works automatically
Do not leave the appliance running unattended
if you know that pets, children or people are in
the vicinity.
Additionally when using the manual controller
a) Only mow in daylight or in good artificial
light.
b) Avoid using the machine in wet grass.
c) Do not operate the machine if you are
barefoot or wearing open sandals. Always
wear sturdy shoes and long trousers.
d) Always switch on the engine according to
the instructions and keep your feet well away
from the blades.
4) maintenance and storage
a) Tighten all nuts, bolts and screws to ensure
that the machine is in a safe operating
condition.
b) Replace worn or damaged parts for safety
reasons.
c) Ensure that only replacement cutters of the
correct type are used.
d) Ensure that the mower is charged with the
charger recommended by the manufacturer.
Improper use can lead to electric shock,
overheating or leakage of corrosive liquid
from the battery.
e) In the event of electrolyte leakage, rinse
with water/neutralising agent, seek medical
attention in the event of contact with eyes,
etc.
f) Maintenance of the machine must be carried
out in accordance with the manufacturer's
instructions.
Do not clean the machine and its components with
solvents, flammable or toxic liquids. Only use a
damp cloth for cleaning.
Ensure that all nuts, bolts and screws are firmly
tightened so that the appliance is always in a safe
operating condition.
Only a regularly serviced and well-maintained
appliance can be a satisfactory tool. Lack of mainte-
nance and care can lead to unforeseeable accidents
and injuries.
Repairs and work not described in these instruc-
tions may only be carried out by qualified specia-
lists.
Only use original accessories and original spare
parts. The use of other spare parts may result in ac-
cidents for the user. The manufacturer is not liable
for any resulting damage.
If you require accessories or spare parts, please
contact our service department.
Accessories:
Knives, Art. No. 85299999
Store the device in a dry place protected from frost.
Lock the appliance in a suitable place to protect it
from unauthorised use.
Allow the motor to cool down before storing the
appliance in a closed room.
DANGER
Switch off the appliance before carrying
out any adjustment, cleaning or mainte-
nance work. Wait until all rotating parts
have come to a standstill and the appli-
ance has cooled down.
Keep hands away from the cutting tool
and other moving parts. Fingers can get
caught in the cutting mechanism and be
severed or injured.
WARNING
Risk of injury
The rotating blades can cause serious cuts or sever
body parts.
• Wait until all rotating parts have come to a standstill.
• All guards and safety devices must be correctly attached for
the appliance to operate.
• Only start the engine when your feet are at a safe distance
from the cutting tools.
• Do not tilt the machine when starting it.
• Never reach under the housing when the appliance is
running.
WARNING
Wear personal protective equipment.
• Do not wear loose clothing or jewellery. Keep hair,
clothing and gloves away from moving parts as they can
be caught by moving parts. Do not use the appliance
when walking barefoot or wearing open sandals.
• Wear protective gloves when working in the blade area
GB
ENGLISH
27