Vortice VORT HR 450 AVEL D Manual De Instrucciones página 39

11.3 CONTROL PANEL FUNCTIONS
2
13 / 01 / 18
In this phase, you can immediately increase the speed to the maximum value (OFF, 1, 2, 3, BOOST) via the button
(to decrease from BOOST, 3, 2, 1, OFF).
1
13 / 01 / 18
You can change the type of data shown on the bottom of the display by using the buttons
2
13 / 01 / 18
Date/time and Prog if weekly programming
is active and Man if speed was changed
manually during weekly programming;
Upon start-up, the display shows the VORTICE logo for about 10 seconds
and then the set operating speed before the last shut-down.
Note: In general, in the absence of user input, after two minutes the display
08:07
will return to the logo screen without saving any changes. In this case,
press
08:07
Prog
08:07
to reactivate the home screen.
Temperatures: External, Internal, Exhaust,
Supply
ENGLISH
2
13 / 01 / 18 08:07
and
(
39