Vortice VORT HR 450 AVEL D Manual De Instrucciones página 46

ENGLISH
Note: the counter can also be reset at any time by accessing the corresponding function in the Installer Menu
T ext probe
A fault on the external temperature sensor generates this signal. After having resolved the problem (through Technical
Service intervention), you can reset the error (answer "YES" for "CALL SERVICE").
MAIN MENU
USE MENU
ALARM
SETUP
Note: the system does not automatically call Technical Service
T int probe
A fault on the internal temperature sensor generates this signal. After having resolved the problem (through Technical
Service intervention), you can reset the error (answer "YES" for "CALL SERVICE").
MAIN MENU
USE MENU
ALARM
SETUP
Note: the system does not automatically call Technical Service
Texh probe
A fault on the exhaust air temperature sensor generates this signal. After having resolved the problem (through Technical
Service intervention), you can reset the error (answer "YES" for "CALL SERVICE").
MAIN MENU
USE MENU
ALARM
SETUP
Note: the system does not automatically call Technical Service
46
ALARM
EXT PROBE
CALL
SERVICE YES
ALARM
INT PROBE
CALL
SERVICE YES
ALARM
EXH PROBE
CALL
SERVICE YES