GreenWorks GD60BC Manual Del Operario página 10

9 TECHNICAL DATA
Voltage 60 V
No load speed 6000 ±10%min
mer),6500 ±10%min
ter)
Cutting head Bump feed / Brush cutter blade
Cutting line diam- 2.4 mm
eter
Cutting path di- 356 / 406mm (Grass trimmer),
ameter 260mm (Brush cutter)
Weight (without 3.6 kg
battery pack)
Battery model G60B2/G60B3/G60B4/G60B6 and
other BAC series
Charger model G60UC and other CAC series
Grass trimmer Measured
sound pressure
level
Guaranteed
sound power
level
Vibration
Brush cutter Measured
sound pressure
level
Guaranteed
sound power
level
Vibration
96 dB. Noise value. (Grass trimmer)
XX
105 dB. Noise value. (Brush cutter)
10 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
English
-1
(Grass trim-
-1
(Brush cut-
L =87 dB(A),
PA
K = 3 dB(A)
pA
L = 96 dB(A)
WA.d
2
7.5 m/s , k=1.5
2
m/s
L = 93dB(A),
PA
K= 3 dB(A)
L =105 dB(A)
WA.d
2
3.5 m/s , k=1.5
2
m/s
9
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
11 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: Globe Technologies Europe GmbH
Address: Brunnenweg 17, 64331 Weiterstadt,
Germany
Name and address of the person authorised to compile
the technical file:
Name: Ralf Pankalla
Address: Brunnenweg 17, 64331 Weiterstadt,
Germany
Herewith we declare that the product
Category: String trimmer / Brush cutter
Model: STC404(GD60BC)
Serial number: See product rating label
Year of Construction: See product rating label
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts,
clauses of harmonised standards have been used:
• EN 60335-1; EN 50636-2-91; EN 62233; EN
55014-1; EN 55014-2 ; EN ISO 3744; ISO 11094;
EN ISO 11806-1; IEC 62321-7-2; IEC 62321-4;
IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC
62321-8; IEC 62321-3-1.
Conformity assessment method to Annex VI / Directive
2000/14/EC.
String trimmer
Measured sound power lev-
el:
Guaranteed sound power
level:
L = 94 dB(A)
WA
L = 96 dB(A)
WA.d
EN