Descargar Imprimir esta página

GreenWorks GD60BC Manual Del Operario página 5

Ocultar thumbs Ver también para GD60BC:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
EN
1
DESCRIPTION
1.1
PURPOSE
This machine is used to cut grass, light weeds, and
other similar vegetation at or around ground level. The
cutting plane must be approximately parallel to the
ground surface. You cannot use the machine to cut or
chop hedges, shrubs, bushes, flowers and compost.
1.2
OVERVIEW
Figure 1 - 20.
Battery release button
1
Rear handle
2
Trigger
3
Lock-out button
4
Speed switch
5
Auxiliary handle
6
Upper shaft
7
Coupler
8
Lower shaft
9
Trimmer head
10
Cut-off blade
11
Guard
12
Screw
13
Release button
14
Positioning hole
15
Screw
16
Lower clamp
17
Knob
18
Tab
19
Spool cover
20
Spool housing
21
Spool
22
Line exist hole
23
Slot
24
Angle transmission hole
25
Metal rod
26
Nut
27
Outer cup
28
Blade
29
Direction of rotation
A
Best cutting area
B
Dangerous cutting area
C
English
2
GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
3
SAFETY
Make sure that you follow all safety instructions.
Refer to Safety Manual.
4
INSTALLATION
4.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
If parts of the machine are damaged, do not use
the machine.
If parts are missing, do not operate the machine.
If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
For your personal safety, do not insert battery before
the tool is assembled completely.
4.2
ATTACH THE GUARD
Figure 2.
Do not touch the cut-off blade.
4
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING

Publicidad

loading