Publicidad
Idiomas disponibles
Idiomas disponibles
• The selected position must be far from the house entrance.
Do not position any equipment or other furniture around the
spa. The water that comes out of the spa during the use or
due to a faulty product can damage the furniture inside the
house or surrounding the pool.
• Do not to install the spa on carpet or other floor materials
(e.g. untreated cork, timber or other porous materials) that
promote or harbor moisture and bacteria, or that could be
affected by water treatment chemicals used in the spa.
• Consult your local government authority for installation
regulations.
Suggested set-up surfaces: grass, ground, concrete, and
all other surfaces that respect the above set-up conditions.
Not suggested surfaces: mud, sand, gravel, deck, balcony,
driveway, platform, soft/loose soil or other surface that does
not meet the above set-up conditions.
Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with SaluSpa installation.
Determine the effects of airborne moisture on exposed
wood, paper, etc. in the proposed location. To minimize
these effects, it is strongly recommended to provide plenty
of ventilation to the selected area. Consult an expert to
determine if more ventilation is needed.
• Keep suitable air treatment in the indoor location (ventilation
and dehumidification) regularly to preserve the bathers'
safety and comfort.
• Empty the spa before removing it from the indoor location or
building.
Outdoor Installation:
• The selected surface must be clear of aggressive plants
and weed species. Those types of strong vegetation could
grow through the liner and create water or air leakage. The
grass or other vegetation that may cause odor or slime to
develop have to be eliminated from the set-up location.
• Do not leave the spa's surface exposed to direct sunlight for
11
Publicidad
