Publicidad
Idiomas disponibles
Idiomas disponibles
12 Reinstall the grease filters and close the hood cover.
DESCRIPTION OF THE HOOD AND CONTROLS
Button
pressure type
Simultaneous
Click
Prolonged click
Click
Prolonged click
Click
Prolonged click
Click
Prolonged click
Simultaneous
Simultaneous
Simultaneous
* Functions available for 60" models only
Button
Affiliation.
Connect the hood to the mains and during the first minute press the buttons B + E for
B + E
5 seconds. If this is not successful, disconnect and reconnect the hood to the mains and
repeat the procedure.
B
Hood start-up / Speed increase.
B
Timed delayed shutdown (of the current speed) Press B for 2 seconds.
C
Speed decrease (until the bell is turned off).
C
Turn off the hood. Press C for 2 seconds.
E
Light switch-on.
E
Adjustment of the light intensity. Press E for 2 seconds.
D*
Ambient light on.
D*
Ambient light intensity control. Press D > 2 seconds.
Adjustment of the illumination tone (warm light/cold light).
D + E
Press D + E > 2 seconds.
C + E
Reset filters. Press C + E for 2 seconds.
Assign new code.
A + D + E
Press A + D + E for 2 seconds.
13 Place the 4 plugs to cover the adjusting screws.
LED
A
B
LED Color
Permanent white
C
Permanent red
D
Flashing red
Flashing green
E
Permanent green
Function
10
Indicator
Data transmission
Battery discharged
On load > low power level
On load > high energy level
Battery charged
Publicidad
