Publicidad
Idiomas disponibles
Idiomas disponibles
USER SERVICING AND MAINTENANCE INSTRUCTIONS
CLEANING
Clean using ONLY a cloth dampened with neutral liquid detergent.
DO NOT CLEAN WITH TOOLS OR INSTRUMENTS. Do not use
abrasive products. DO NOT USE ALCOHOL!
PANEL
The panel for perimeter suction should always be left closed
and should only be opened in case of maintenance
interventions (eg cleaning or replacing filters).
GREASE FILTER
Traps cooking grease particles.
This must be cleaned once a month (or when the filter saturation
indication system – if envisaged on the model in possession – in-
dicates this necessity) using non aggressive detergents, either by
hand or in the dishwasher, which must be set to a low temperature
and a short cycle.
When washed in a dishwasher, the grease filter may discolor sli-
ghtly, but this does not affect its filtering capacity.
To remove the grease filter, pull the spring release handle.
REPLACING LAMPS
2x14 W LED
The hood is equipped with a lighting system based on LED
technology.
The LEDs guarantee an optimum lighting, a duration up to 10
times longer than the traditional lamps and allow to save 90%
electrical energy.
For replacement, contact the technical service.
HOOD REMOVAL
Remove the caps covering the adjustment screws with a
•
jeweler's screwdriver in the slot so as not to damage the
hood.
1
Between 3 or more people, loosen the adjusting screws by
•
turning counterclockwise with the 3/16" allen wrench.
CAUTION: It is important that 2 people hold the bell while
another person loosens the screws to avoid accidents.
A
C
12
2
B
D
Publicidad
