Publicidad
Idiomas disponibles
Idiomas disponibles
5.15
Installing the air distributor
assembly
1.
Attach the air distributor (1) to the air distributor mounting
bracket (3) by engaging the two parts.
– You will hear four clicks of the latches (2) when the air
distributor (1) and the mounting bracket (3) connect to-
gether.
Fig. 27 Attaching the air distributor assembly to the mounting bracket
2.
Fix the air distributor (1) on the air distributor mounting
bracket with four ST4.2 * 19 pan head screws (2).
Fig. 28 Fixing the air distributor assembly to the mounting bracket
– The following step is optional. The purpose of this step
is to close a potential gap between the air distributor
and the ceiling of the vehicle by using 4 countersunk
screws.
– To install these screws:
3.
Attach the air distributor (1) to the ceiling using 4 counter-
sunk screws (2).
9039408E_OI-II_Cool Top Trail 20-24
Fig. 29 Fixing the air distributor to the ceiling
4.
Install the air filters (2) as illustrated below:
Fig. 30 Installing the air filters
5.16
Installing the remote control
holder
1.
Find a convenient location to install the remote control
holder (1).
2.
Use the 2 countersunk screws (2) to secure the holder.
Fig. 31 Remote control holder
5.17
Testing the system
l Test all air conditioner functions as described in chapter 6,
"Operating Instructions" on page 12.
l Make sure that the condensate outlets are clear after in-
stalling the outdoor unit.
l Enter the new vehicle height and weight in the vehicle doc-
uments if required.
l Hand this document over to the new vehicle owner.
Installation instructions | 5
11 / 155
Publicidad
