Suntec Wellness KLIMATRONIC MULTIFREEZE 2.6 Eco R290 APP Manual Del Usuario página 17

1 Power
2 + (Up)
3 – (Down)
4 Sleepmode
5 High vwntilation level
6 Low ventilation level
Functions
Cooling mode
• After starting the unit it will automatically start with default settings: cooling mode, low fan speed.
• Please press the cooling mode button to set the cooling mode; the cooling mode indicator lights up.
Press the ▲ or ▼ to adjust to the temperature (16°C – 31°C).
Press the FAN button to adjust the fan speed (high or low).
•
Heating Mode
Please press the heating mode button to switch on the heating mode.
•
Please press the cooling mode button to set the cooling mode; the cooling mode indicator lights up.
•
Press the ▲ or ▼ to adjust to the temperature (16°C – 31°C).
Fan mode
Please press the fan mode button to set the fan mode; the fan mode indicator lights up.
•
Press the FAN button to adjust the fan speed (high or low).
•
Temperature setting and sleep mode cannot be set.
•
Timer
In standby mode, press the TIMER button to set the on-time. The timer indicator lights up.
•
After starting the unit press the TIMER button to set the off-time. The timer indicator goes off.
•
Please press the ▲ (up / +) or ▼ (down / -) buttons to set the desired time.
•
Dehumidifying mode
• Drücken Sie die Taste MODE, um den Entfeuchtungsmodus einzustellen, der Entfeuchtungsmodus-
Indikator leuchtet.
Temperatureinstellung und Schlafmodus können nicht eingestellt werden, die Geschwindigkeit des
•
Ventilators bleibt automatisch niedrig.
Sleep mode
Press the SLEEP MODE button, the fan speed will be automatically adjusted on the low level.
•
In Cooling Mode:
•
After 1 hour the preset temperature is automatically increased by 1 ℃, after another hour the preset
temperature is automatically increased again by 1 ℃.
In Heating Mode:
After 1 hour the preset temperature is automatically decreased by 1 ℃, after another hour the preset
temperature is automatically decreased again by 1 ℃.
Sleep mode is not adjustable during dehumidifying and fan mode. If the water tank is full, the standby
•
mode will switch on, settings will be deleted and the sleep mode will be disable.
Connection to the WLAN and the Suntec Wellness APP
• Please download the "SUNTEC Wellness" app from the App Store or Google Play and install it.
• Please create a user account after the installation.
• Please activate the Bluetooth access in the settings of your mobile device.
• Please place the device within 5 meters of your router.
• As soon as you have connected the device to the power, the WiFi indicator flashes. If no connection
attempt is made for 3 minutes, the indicator on the device goes out.
• To establish a new connection, please press the "WiFi" button for approx. 5 seconds until the WiFi
indicator flashes quickly.
• Please follow the steps below in the app as soon as the indicator flashes:
• Please select "Add device".
Please select under the category "large household appliances", "portable air conditioner" and
•
then follow the instructions on your mobile phone screen.
As soon as the device is successfully connected, the WiFi indicator lights up constantly.
•
7 Ventilationmode
8 Dehumidification mode
9 Cooling Mode
10 LED Display
11 "Watertank full" indicator
12 Timer
13 Heating Mode
14 WiFi- Button