cecotec BOLERO FLUX TM 606500 INOX A Manual De Instrucciones página 51

Replacing the light bulb/lamp
Please note:
- The light bulb must be replaced by the official Cecotec Technical Support Service or
similarly qualified technicians.
- Always disconnect the power supply before performing any operation on the appliance.
When handling the bulb, make sure that it has cooled down completely before any direct
contact with your hands.
- When handling the bulbs, hold them with a cloth or gloves to prevent sweat from coming
into contact with the bulb, as this may reduce the bulb life.
Note:
- Before changing the light bulb, make sure that the appliance is switched off and unplugged.
- Protect yourself from danger when changing the light bulb, e.g., by wearing gloves.
6. TROUBLESHOOTING
Fault
The indicator light
is on, but the motor
does not work
Cause
The kitchen hood is
obstructed.
The condenser is
damaged.
Motor is jammed or
bearing damaged.
Motor is burnt or gives off
a bad smell.
BOLERO FLUX TM 606500 INOX A / BLACK A / 906500 INOX A
Solution
Remove what is obstructing the hood.
Please contact the official Cecotec
Technical Support Service to replace
the condenser.
Please contact the official Cecotec
Technical Support Service to replace
the motor.
Please contact the official Cecotec
Technical Support Service to replace
the motor.
ENGLISH
51