cecotec BOLERO FLUX TM 606500 INOX A Manual De Instrucciones página 52

ENGLISH
Neither the light bulb
nor the motor works
Grease falls out of
the aluminium filters
The kitchen hood
vibrates
The kitchen hood
is not sufficiently
extracting
The kitchen hood is
tilted
If none of these situations match your problem, do not attempt to disassemble, or repair the
appliance by yourself. Repairs carried out by unqualified persons may result in injury or serious
malfunctions. Contact the official Cecotec Technical Support Service. The repair must be carried
out by an authorised technician, and you must use only original spare parts.
52 BOLERO FLUX TM 606500 INOX A / BLACK A / 906500 INOX A
In addition to the above, check the following:
The light bulb has blown.
Power cable is loose.
The filters are very dirty.
The fan is damaged,
causing the kitchen hood
to vibrate when extracting
air.
The engine is not securely
fastened.
The kitchen hood is not
securely fastened.
The distance between
the kitchen hood and the
cooking surface is too
large.
There is too much
ventilation in the room
due to open doors or
windows.
Fastening screws are not
tightened properly.
Plastic plugs are not
tightened properly.
Please contact the official Cecotec
Technical Support Service to replace
the light bulb.
Please contact the official Cecotec
Technical Support Service to connect
the cables according to the wiring
diagram.
Clean or replace the aluminium filters
immediately.
Please contact the official Cecotec
Technical Support Service to replace
the fan.
Fix the engine correctly.
Fix the kitchen hood correctly.
Readjust the distance.
Relocate and reinstall the kitchen
hood.
Reposition the kitchen hood
horizontally and tighten the screws.
Reposition the kitchen hood
horizontally and tighten the plugs.