Publicidad
Idiomas disponibles
Idiomas disponibles
202161_s1_s1_5059340093833-5059340093840_C&L_A5_IM_Multi_V04.pdf, Cycle:5, Status:Approved
04
Using the timer
You can set the timer from 1-99 minutes and this can be used in two ways:
1. As an alarm that does not alter any of the cooking zones.
2. As an automatic switch off function to turn off one cooking zone.
Using the timer as an alarm
1. Switch on the hob using (C).
2. Select the cooking zone using (A) and the power level required.
3. When the indicator stops flashing, touch the timer key (E)
4. Touch the "+" or "–" keys once to increase or decrease one minute at a time.
5. Or touch and hold the "+" or "–" keys to increase or decrease ten minutes at a time.
The timer will commence countdown and show the remaining time.
The timer will beep for 30 seconds once completed.
6. To cancel the alarm press
Using the timer to switch off the zones
1. Select the cooking zone using (A) and select the power required.
2. Before the indicator stops fl ashing, touch the timer key (E)
3. Touch the "+" or "–" keys once to increase or decrease one minute at a time.
4. Or touch and hold the "+" or "–" keys to increase or decrease ten minutes at a time.
The timer will commence countdown and show the remaining time.
The timer will beep for 30 seconds once completed.
5. To cancel the timer, select cooking zone using (A), press
shows "00".
When using "the timer as an alarm" and "the timer to switch off the zones" together, the display will
show the remaining time of alarm as first priority. Press cooking zone to show the remaining time of
switch off timer.
202161_s1_s1_5059340093833-5059340093840_C&L_A5_IM_Multi_V04.indd 51
202161_s1_s1_5059340093833-5059340093840_C&L_A5_IM_Multi_V04.indd 51
Printed by Henry Leung, 06/05/2021 01:52:54
NOTE: This function only operates on one zone at a time; the other zone will
continue to operate as normal.
NOTE: You can use the timer function independently of the cooking zones.
then press "–" key until display shows "00".
NOTE: The dot next to the selected timer controlled cooking zone will flash when
the timer is operative for example
and the timer will flash "10".
and the timer will flash "10".
then press "–" key until display
page 52 of 108 pages
51
28-04-2021 17:43:17
28-04-2021 17:43:17
Publicidad
