Descargar Imprimir esta página

FujiFilm instax mini Evo Guía Rápida Del Usuario página 12

Ocultar thumbs Ver también para instax mini Evo:

Publicidad

Idiomas disponibles

Idiomas disponibles

■ Certification marks acquired by the camera are located
inside the film chamber.
EN
■ Cautions During Printing
Do not shake the
Do not drop the
camera while
camera while
printing.
printing.
■ INSTAX MINI Instant Film and Print Care
This camera uses INSTAX MINI instant print film, sold
separately. See FUJIFILM INSTAX MINI instant film pack use
instructions. Follow all instructions for safe and proper use.
1. Keep the film in a cool place. Do not leave the film in a
place where the temperature is extremely high (e.g., in a
closed car) for many hours.
2. Do not puncture, tear, or cut INSTAX MINI instant film. If
film becomes damaged, do not use.
3. When you load a film pack, use the film as soon as possible.
4. If the film has been kept in a place where the
temperature is extremely high or low, bring it to room
temperature before loading or starting to print photos.
5. Be sure to use the film before the expiration or "Use
Before" date.
6. Avoid airport checked luggage inspection and other
strong X-ray illumination. Such exposure may cause
fogging and otherwise affect your unused film. Carrying
your camera and film onto an aircraft in your carry-on
12
BO-38_QM_NA.indb 12
luggage is recommended. (Check with each airport for
more information.)
7. Avoid strong light, and keep the developed prints in a
cool and dry place.
8. Do not puncture or cut the film as it contains a small
amount of caustic paste (high alkaline). Never let
children or animals put the film into their mouth. Also
pay attention so that the paste does not come into
contact with skin or clothes.
9. If the paste inside the film comes into contact with skin
Do not cover the
or clothes, immediately wash off with plenty of water.
film ejection slot
If the paste comes into contact with the eyes or mouth,
while printing.
immediately wash the area with plenty of water and
contact a doctor. Note that the alkaline inside the film
remains active for about 10 minutes after the photo has
been printed.
■ Cautions on Handling the Film and Prints
See below for film activities to be avoided.
1/6/2023 12:34:39 PM

Publicidad

loading

Este manual también es adecuado para:

Fi038