WARNINGS ON ELECTROMAGNETIC COMPATIBILITY
• The appliance is suitable for use in any environment indicated in these instructions for
use, including domestic environments.
• Under certain circumstances, in the presence of electromagnetic disturbance, use of the
appliance may be subject to limitations. Consequently, error or failure messages may
appear on the display/ appliance.
• Do not use this appliance in the immediate vicinity of other electrical appliances, as this
could cause a malfunction.
• Failure to comply with these notes could be detrimental to the performance of the ap-
pliance.
• Mobile telephones or appliances that generate electromagnetic fields must not be used
in the vicinity of the product.
• Do NOT use the product in environments subject to electromagnetic interference.
Additional quantitative data regarding electromagnetic compatibility are available from
Farmamed and can be obtained upon request.
Integrated rechargeable battery
When using for the first time, it is recommended to fully
charge the battery for at least 30 minutes.
To recharge the battery, insert the micro-USB connector of
the cable (supplied) into the micro-USB charging socket of
the device (Fig. 5), then connect the standard USB connec-
tor of the USB cable to the appropriate power supply (not included), with an output of
DC 5V 1A, conforming to the IEC 60601-1 electrical safety standard. During charging the
green indicator will flash and stop flashing when the battery is fully charged. It is recom-
mended to charge the battery for at least 2 hours. Once fully charged, the device can work
continuously for approximately 60 minutes.
While using the device, if the residual battery charge is insufficient, the blue indicator
visible on the ON/OFF power button will start flashing 5 times, then turn off. Follow the
steps described above to recharge the battery.
DEVICE PREPARATION
1
2
3
Fig. 5
4
EN
25