Publicidad
Idiomas disponibles
Idiomas disponibles
4
5
Nebulizer assembly
4
1. Remove the device and accessories from their respective bags.
2. Insert the medication reservoir on the main unit, until you hear a "click". (fig. 6)
3. Connect the desired accessory: mouthpiece, if the treatment is to be administered
through the throat, mask for children or adults if it is to be administered simultaneously
through the nasal cavity and throat (Fig.7).
7
Fig. 6
Adjusting the headbands
To adjust the length of the elastic bands, unscrew the fastener using a screwdriver (not
included) if necessary, and reinsert it into the chosen hole.
The screws contain nickel.
For hygienic reasons, the nebulizer and accessories must be cleaned before and after
each use and disinfected after the last treatment of the day. See chapter "Maintenance
and upkeep".
1) Filling the tank (Fig. 9)
• Open the reservoir cover by releasing the hook on the back of the device following the
EN
arrows shown in the figure (upwards).
26
• Pour the medication into the reservoir.
• Close the cap clockwise.
6
5
Fig. 8
INSTRUCTION FOR USE
6
8
9
Fig. 7
11
10
Publicidad
