Publicidad
Idiomas disponibles
Idiomas disponibles
• The device is fitted with a liquid level sensor which automatically stops the device when
the liquid level in the tank is less than 2 ml. In this case a blue light will flash 3 times.
For technical reasons there is still a small residue of product in the tank, which must be
removed by careful cleaning before storing the device.
4) Disassembling the device
• Remove the mouthpiece or mask.
• Remove any residual liquid remaining in the
reservoir (do not reuse).
• Remove the medicine tank as shown in Fig. 10
by pressing the PRESS button.
Explanation of the different light colours of the power button
Steady blue light
Blue light flashes 3 times
Blue light flashes 5 times
Blue light flashes 10 times
Flashing green light
Steady green light
Blue light flashes 10 times
Note: If there is enough liquid, but the blue light flashes 10 times, press the ON/OFF
power button to continue the nebulization.
EN
28
Fig. 10
Working device
No liquid, auto-power off
Low battery, auto-power off
Auto power off after 10 minutes
of use
Charging
Recharge completed
Auto power off after 10 minutes
of use
Publicidad
