HTW EON -S026EON-R32 Manual De Usuario E Instalacion página 51

SPLIT 1X1 EON
3.5 REMOTE CONTROL DISPLAY
Signal Emission Symbol
It appears when control
signal is emitted.
Setting temp Display
Display the setting
temperature and
timing time.
Timer Display
Displayed when setting
time to turn on or turn off
the air conditioner
Sleep Mode Display
Displayed when pressing
"Sleep" button, the unit
will run in sleep mode.
I FEEL Display
It appears when I FEEL
function is set (optional)
UVC Display
It appears when UVC
function is set (optional)
Instruction for remote controller
• The remote controller uses two AAA batteries under normal condition, the batteries last for about 6 months.
Please use two new batteries of similar type (pay attention to the poles in installing).
• When using remote controller, please point the signal emitter towards indoor unit receiver; There should
be no obstacle between remote controller and indoor unit.
• Pressing two buttons simultaneously will result wrong operation.
• Do not use wireless equipment (such as mobile phone) near indoor unit. If interference occurs because
of this, please switch off the unit, pull out power plug, then plug again and switch on aftera while.
• There is no direct sunlight to the indoor receiver, or it can not receive the signal from the remote controller.
• Don' t cast the remote controller.
• Don' t put the remote controller under the sunlight or near the oven.
• Don't sprinkle water or juice on the remote controller, use soft cloth for cleaning if it occurs.
• The batteries must be removed from the appliance before it is scrapped and that they are disposed
of safety.
Turbo Display
It appears when turbo function is set in cooling
or heating mode, and display
AUH Display
The symbol appears when
pressing "AUH" button
in heating mode (optional)
USER AND INSTALLATION MANUAL
3. COMPONENT DESCRIPTION
A
Displayed in according with
vertical blades position and
H-sweep button (optional)
G+ Display
Displayed when turn
on the generator
mode (optional)
Operating Mode
Selection Display
AUTO HEAT
A
COOL DRY
FAN
Wind Speed
Selection Display
Auto
A
High speed
Medium speed
Low speed
Vertical Swing Display
swing or not.
Horizontal Swing Display
Displayed when pressing
ECO Display
Display when pressing
ECO button (optional)
Quiet Display
Displayed when pressing
quiet button (optional)
51
