Maximum voltage
9.1.2.
• Use the control
Use the control
3000 to 80,000 V in steps of 100 V) and press
After all parameters have been set, exit the MENU and start the test by
pressing
.
9.2. Auto mode
In this fully automatic mode the operator will program the maximum
current, maximum test voltage and maximum test time.
To configure these parameters follow the instructions below:
• Access the device's MENU using the
• Use the control
• Use the control
, to select MAXIMUM VOLTAGE and press
to select the desired maximum voltage value (from
, to select SETUP TEST and press
SETUP TEST
LANGUAGE
SETTINGS
, to select AUTO and press
25
HP
to confirm.
button.
.
.
80KV
.