MEGABRAS HP-80KV Manual De Uso página 25

Maximum current
9.2.1.
(See 9.1.1, pg. 24)
Test voltage
9.2.2.
• Use the control
Use the control
to 80,000 V in steps of 100 V) and press
After all parameters have been set, exit the MENU and start the test by
pressing .
Dwell time
9.2.3.
• Use the control
Use the control
seconds) and press
After all parameters have been set, exit the MENU and start the test by
pressing .
, to select TEST VOLTAGE and press
to select the desired test voltage value (from 3000
, to select Dwell time and press
to select the test duration time (from 15 to 1200
to confirm.
26
.
to confirm.
.