Fuel And Chain Oil - STERWINS PCS 46 Manual De Instrucciones

FUEL AND CHAIN OIL

F5
With the purpose of obtaining a good fuel mixture, place the oil in an accredited container
for fuel before placing the fuel. The use of low quality fuel and oil, can reduce the lifetime of
the pieces of the machine.
The properties of the fuel mixture can be deteriorated with time, and it must be used before 2
months. We recommend to prepare the fuel mixture according to the immediate necessities.
Do not use more than two months fuel mixture since it could signify a bad engine
performance.
WARNING: Shake well the fuel mixture container before pouring it into the machine.
Keep open flames away from the area where fuel is handled or stored.
Mix and store fuel only in an approved gasoline container.
NOTE
Most engine troubles are caused, directly or indirectly, by the fuel used on the machine.
Take special care not to mix it with a motor oil for 4 cycle engines.
F6
FUEL
Mix unleaded fuel grade 95 and totally synthetic oil
for 2 stroke engines.
Recommended mixing ratio to 2,5% (40:1)
Each 25 cc of totally synthetic oil for 2 stroke
engines with one litre of unleaded fuel of 95 grades.
CHAIN OIL
Use motor oil SAE #10W-30 all year round or SAE
#30~#40 in summer and SAE #20 in winter.
NOTE
Do not use wasted or regenerated oil that can
cause damage to the oil pump.
34