cecotec BAMBA IONICARE ROCKSTAR NANO IONTECH Manual De Instrucciones página 27

- Air temperature change button: press this button to change the air outlet temperature
of the hair dryer (each press will change the temperature). The temperature has three
adjustable levels: cold, 55 ºC (warm) and 90 ºC (hot).
- Low air speed icon: this icon lights up when the hair dryer is operating at low speed.
You can modify the air temperature between cold, warm, and hot.
- Medium air speed icon: this icon lights up when the hair dryer is operating at medium
speed. You can modify the air temperature between cold, warm, and hot.
- High air speed icon: this icon lights up when the hair dryer is operating at high speed.
You can modify the air temperature between cold, warm, and hot.
- Cold air icon: this icon lights up when the hair dryer is blowing out cold air.
- 55 ºC icon: this icon lights up when the hair dryer is blowing out warm air.
- 90 ºC icon: this icon lights up when the hair dryer is blowing out hot air.
Operation
1. Connect the product to a power outlet and press the power button to switch it on.
2. Choose the right air speed and temperature according to the condition of your hair.
Warning: the hair dryer has a built-in Memory function that allows you to remember the last
speed and temperature setting used before switching it off. When you switch on the hair dryer
again, the default settings will correspond to the settings you selected before switching it off
the last time.
3. Both the hair dryer and the nozzles have a magnetic joint to make them easy to put on and
take off. Simply align the nozzle with the air outlet and turn it 360° until it clicks into place.
4. When using the hair dryer, hold the handle properly so as not to block the air inlet and
prevent the dryer from being damaged or overheated. Keep your hair away from the air
inlet by at least 10 cm to avoid tangles. Keep your hair away from the air outlet by at least
3 cm to avoid burns.
5. After use, switch off the hair dryer and unplug the power cable.
4. CLEANING AND MAINTENANCE
- Before cleaning, make sure that the dryer is switched off and disconnected from the mains.
- Do not use alcohol, nail polish remover or detergent to clean the dryer, as this may damage,
break, or discolour it.
Cleaning the detachable air inlet grille and filter. Fig. 2
- The grille and filter should be regularly cleaned to prevent dirt build-up and to ensure
optimum air inlet.
- The air inlet grille and the nozzle are magnetically attached.
1. Hold the dryer firmly by the handle and pull the air inlet grille downwards to remove it.
2. Use a cotton swab to remove and clean any dirt in the air inlet and outlet.
BAMBA IONICARE ROCKSTAR NANO IONTECH
ENGLISH
27