MBO Merkura 1040 Instrucciones Para El Servicio página 26

Merkura 1040 GB neu
6
Battery
installation
Note
Batteries are hazar-
dous waste. Do not
dispose them
together with the
household garbage.
Please return them to
your dealer for recyc-
ling or dispose of
them separately in
your local recycling
facility.
www.MBOservice.net
05.03.2003
BEFORE STARTING
Computer watch
Remove the back cover of
the computer with a screw-
driver, install the 3.0V-bat-
tery with the positive (+)
pole facing up and replace
the cover.
Remove the battery and
reinsert it if the LCD displays
irregular figures. This will
clear and restart the compu-
ter`s microprocessor. The
device should then function
normally again.
Transmitter belt
Remove the battery compartment from the
transmitter belt (Fig.2a). Open the battery cover
underneath with a Philips screwdriver. Insert a
12V battery (type VR22 / L1028). Make sure that
you insert the battery with the poles as shown on
the sketch (Fig.2b). Close the battery compartment.
Make certain that the cover is firmly closed to
prevent ingress of moisture in the transmitter.
Fig.2a
16:45 Uhr Seite 6
Fig.1
Fig.2b