Mase Generators IS 10 T 50 Hz Manual De Uso Y Mantenimiento página 31

Any maintenance operation on the generator must
be carried out with the engine off after letting it cool
down sufficiently, and must be carried out by
authorised personnel.
Before accessing the generator, disconnect one pole
of the starter battery in order to prevent accidental
starting.
Check the oil level by means of the graduated dipstick
[Fig. 7, Ref. 2]. The level must always be between the
MAX and MIN notches on the dipstick [Fig. 7 Ref. 1].
The first engine oil change must be carried out after
50 hours of generator operation. For the second and
subsequent oil changes, every 200 hours is sufficient.
For more detailed information on engine lubrication,
consult the engine use and maintenance manual
attached to the generator.
Dispose of the used oil or fuel in an appropriate
manner as they are polluting products.
Take the used engine oil to special collection centres
responsible for disposal.
Avoid contact of engine oil with the skin. During
maintenance operations use gloves and protective
glasses.
In case of contact with engine oil, immediately and
thoroughly wash the affected part with soap and
water.
For the safety of the engine, use only original spare
parts.
When the operation has been completed, thoroughly
wipe off all oil and fuel from the engine parts.
IS 10 T
GB
GB
- 17