Sony KP-41T35 Manual De Instrucciones página 16

t
4 press ¢ or + to select CHANNEL ERASE/ADD,
and press (>.
The CHANNEL ERASE/ADD menu appears.
CHANNEL ERASE/ADD a9
bERASE
ADD
DMENU
Use{0 - 9}or [CH+/-]
to select the channel.
on
Use 0@ G Exit ad
5 erase and/or add channels:
To erase an unwanted channel
(1) Make sure the cursor (P) is beside ERASE.
(2) Press CH +/- or the 0 — 9 buttons to select the
channel you want to erase, and press ENTER.
Selected channel number
CHANNEL ERASE/ADD.
bERASE
ADD
DMENU
Use[0 ~ g]or [CH+/-]
to select the channel.
Use O@ G) Exit (3
(3) Press ;
The "—" indication appears beside the channel
number, showing that the channel is erased
from the preset memory.
To add a channel that you want
(1) Press # or # to move the cursor (P) to ADD.
(2) Press the 0 - 9 buttons to select the channel you
want to add, and press ENTER.
- Selected channel number
QOOO ©©©
C©E®
O3
(3) Press G).
The "+" indication appears beside the channel
number, showing that the channel is added to
the preset memory.
16-EN
Getting Started
6 To erase and/or add other channels, repeat
step 5.
7 Press MENU to return to the original screen.
MENU
Notes
¢ If you erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
¢ Erasing and adding channels is also available for the AUX
input.
a
Adjusting convergence
(CONVERGENCE)
The projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not have to do this procedure if you perform
AUTO SET UP (page 14). Do this procedure only
when you want to adjust it manually.
1 Press MENU.
2 Press ¢ or # to select «+ , and press |->.
3 Press # or 4 to select CONVERGENCE, and
press ©).
The CONVERGENCE adjustment screen appears.
CONVERGENCE
é se GUQRRTM Exit
R _R=Red
G=Green
~ B=Blue