Publicidad
Idiomas disponibles
Idiomas disponibles
Choose
To
ON
Listen to the sound from the
projection TV.
OFF
Turn off the projection TV speaker
sound and listen to the projection
TV's sound solely through the audio
systenrspeakers.
SAVA SP
Turn off the projection TV speaker
sound and listen to the projection
TV's sound througifthe Sony SAVA
series speaker system. You can adjust
volume, muting, surround modes,
and super woofer mode with the
remote control supplied with the
projection TV.
LSS
a
a
ae
Pas)
To select surround sound or super
woofer mode of the SAVA speaker
system
After setting SPEAKER to SAVA SP, follow the
procedure below.
Press # or 4 to select SURROUND
MODE or
SUPER WOOFER MODE, and press ©).
For details on each option, refer to the operating
instructions of the speaker system.
MTS
STEREO
SPEAKER : SAVA SP
SURROUND MODE
Bist WOOFER MODE
Note
_ © This feature is only for Sony SAVA speaker system with an
operation capability for KP-41T35, KP-48535, KP-53S35, and
KP-61S35.
Operations
28-N
Setting audio out
(AUDIO OUT)
You can change AUDIO OUT to VARIABLE or FIXED
when SPEAKER is set to OFF.
AUDIO OUT is variable when SPEAKER is set to ON.
1 Press MENU.
2
Press ¢ or # to select /, and press ©).
3 Press + or # to select AUDIO OUT, and press
4
Press ¢ or 4 to select VARIABLE
or FIXED,
and press ©).
KER | OFF
PAUDIO OUT : VARIABLE
ot MENU
Exit (3
VARIABLE:
Sound output varied according to the
projection TV settings. You can adjust
the volume, bass, treble, and balance.
FIXED: Sound output is always fixed to a certain
level. The volume, bass, treble, and balance
are also fixed to the factory settings.
5 press MENU to return to the original screen.
Note
¢ If AUDIO OUT appears in gray, set SPEAKER to OFF.
Publicidad
