HT Instruments EQUITEST Manual De Instrucciones página 33

7.2. GENERAL CHARACTERISTICS
Reference guidelines
Safety:
EMC:
RED:
EMC environment of use:
Insulation:
Pollution level:
Measurements:
Measurement category:
Power supply
Main's supply:
Power consumption:
Fuse protection:
External communication
MASTER instrument interface:
Mobile devices interface:
Internal status indications:
Mechanical characteristics
Dimensions (L x W x H):
Weight (with integrated cable):
Mechanical protection:
Environmental conditions
Reference temperature:
Working temperature:
Working humidity:
Storage temperature:
Storage humidity:
Max operating altitude:
This instrument compliance with the requirements of Low Voltage
Directive 2014/35/EU (LVD), the RED 2014/53/EU directive and EMC
This instrument satisfies the requirements of European Directive
2011/65/EU (RoHS) and 2012/19/EU (WEEE)
7.3. ACCESSORIES
7.3.1. Standard accessories
See the enclosed packing list
33
IEC/EN61010-1, IEC/EN61010-2-030,
IEC/EN61557-1
IEC/EN61326-1, IEC/EN61326-2-2
ETSI EN300328, ETSI EN303446-1, ETSI
EN301489-17
portable, Class B, Group 1
double insulation
2
IEC/EN61439-1, IEC/EN60204-1,
IEC/EN62305-3
CAT III 300V to ground and between
inputs
230V/240V ±10%, 50/60Hz or 110V
±10%, 50/60Hz Check that the rated
operating voltage value indicated on
the back label should be consistent
with the power supply voltage of the
system under test
max 70W (@230V, 300mA) (@110V,
600mA)
Time-Leg 250V/1A (5x20mm)
optical cable C2050
WiFi (via APP HT Equitest)
two colours LEDs
210 x 115 x 60mm (8 x 5 x 2in)
approx. 1kg (32ounces)
IP40
23°C ± 5°C (73°F ± 41°F)
0°C ÷ 40°C (32°F  104°F)
<80%RH
-10°C  60°C (14°F  140°F)
<80%RH
2000m (6562ft)
Directive 2014/35/EU
EQUITEST