HT Instruments EQUITEST Manual De Instrucciones página 24

2. GENERAL DESCRIPTION
The EQUITEST instrument is designed to carry out the continuity
measurement of protective and equipotential conductors with test
current >10A AC in the following ways:
•
Independently using the dedicated HT Equitest APP available
for iOS and Android systems, freely downloadable from the
respective stores by referring to the following QR codes:
Compatibility with Android systems
Compatibility with iOS systems version
•
In combination with the following models of verification
instruments (MASTER units) of the HT family:
Model (*)
COMBI519
COMBI521
SUPERCOMBIs
Optical with cable
EASYTEST
MACROTESTG3
MACROEVTEST
GSC60
(*) The list of available models can be changed without notice. In case of doubt contact the HT
after-sales service
(**) User-upgradable firmware even for older models
The instrument uses the 4-terminal measurement method that
allows self-compensation of the resistance of the test cables and
therefore their extension without the need to perform any
preliminary calibration
The followed features are available:
•
Continuity of protective and equipotential conductors with
current> 10A AC and no-load voltage <24V AC
•
Power supplies available: 110V ± 10% or 230 / 240V ± 10%
•
LED indications for measurement execution control
•
Connection via serial/optical cable to MASTER units
•
Detection of Manual and Automatic operating modes
•
WiFi connection to mobile devices via HT Equitest APP for
independent use
•
Input protection fuse
24
version 5.0 or higher
11.0 or higher
Connection
C2050
EQUITEST
Android
iOS
FW version (**)
2.01 (or higher)
2.10 (or higher)
1.25 (or higher)