HT Instruments EQUITEST Manual De Instrucciones página 25

3. PREPARATION FOR USE
3.1. INITIAL CHECKS
Before shipping, the instrument has been checked from an electric
as well as a mechanical point of view. All possible precautions have
been taken so that the instrument is delivered free of damage.
However, a thorough check of the instrument is recommended to
detect any damage suffered during transport. In case anomalies are
found, immediately contact the forwarding agent. Also check
whether the packaging contains all parts indicated in § 7.3.1. In case
of discrepancy, please contact the Dealer. Should the instrument be
returned, please follow the instructions given in § 8.
3.2. DURING USE
Read carefully the following recommendations and instructions.
Failure to observe the warnings and/or instructions may
damage the instrument and/or its components or be a
source of danger for the operator
•
When the instrument is connected to the circuit under test,
never touch any unused terminal
3.3. POWER SUPPLY
The instrument is powered by 230VAC, 50/60Hz (default
condition) or 110VAC, 50/60Hz via the supplied plug cable
Check that the rated operating voltage value indicated
on the back label should be consistent with the power
supply voltage of the system under test
3.4. STORAGE
To guarantee accurate measurement, after a long storage time,
wait for the instrument to come back to normal condition (see § 7.2)
25
CAUTION
CAUTION
EQUITEST