Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
ENGLISH
will begin counting down.
will begin counting down.
DELAY
the selected wash cycle will be increased.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
appears on the display; each time you press the button,
switches off and the wash cycle begins.
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH
ENGLISH
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
DELAY
DELAY
will begin counting down.
will begin counting down.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
PORTUGUÊS
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
switches off and the wash cycle begins.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
ENGLISH
the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY
«h» switches off.
DELAY
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
will begin counting down.
will begin counting down.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h»
appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h»
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
has been started.
has been started.
of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light
of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of
switches off and the wash cycle begins.
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
DELAY
DELAY
«h» switches off.
«h» switches off.
Tabela de programas
To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
To adjust the delay time and select a shorter period of time,
the selected wash cycle will be increased.
will begin counting down.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button
2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
of time between 1 and 12 hours.
has been started.
of time between 1 and 12 hours.
has been started.
repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
DELAY
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
«h» switches off.
the selected wash cycle will be increased.
«h» switches off.
the selected wash cycle will be increased.
will begin counting down.
To adjust the delay time and select a shorter period of time,
will begin counting down.
The start time of the program may be delayed for a period
The DELAY function cannot be set once a wash cycle
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
The DELAY function cannot be set once a wash cycle
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
Programa
Program
of time between 1 and 12 hours.
has been started.
the time (1h, 2h, etc. up to max. 12h) from the start of
has been started.
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
the selected wash cycle will be increased.
will begin counting down.
will begin counting down.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
Program
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
has been started.
switches off and the wash cycle begins.
Eco
Eco
1 Eco
1
1
the selected wash cycle will be increased.
will begin counting down.
will begin counting down.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
2. Select the wash program, press the START/PAUSE
The DELAY function cannot be set once a wash cycle
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Conventional
Conventional
button and within 4 seconds close the door: the timer
2
switches off and the wash cycle begins.
2
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
has been started.
repeatedly until the selected delayed start indicator light
has been started.
Program
Eco
Eco
1
1
2 Auto
wash and dry
wash and dry
will begin counting down.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
Conventional
Conventional
Intensive
Intensive
3
3
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
has been started.
has been started.
repeatedly until the selected delayed start indicator light
2
2
Eco
wash and dry
wash and dry
Eco
1
1
3 Intensivo
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
4
Fast
4
Fast
repeatedly until the selected delayed start indicator light
has been started.
has been started.
Conventional
Intensive
Intensive
Conventional
3
3
Program
4 Lavagem rápida
2
2
Eco
«h» switches off.
1
wash and dry
wash and dry
30'
The DELAY function cannot be set once a wash cycle
Sanitizing
Sanitizing
5
5
Fast
Fast
4
has been started.
4
Conventional
Program
5 Lavagem e
Intensive
Intensive
3
3
Eco
2
Eco
1
1
wash and dry
secagem rápidas
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Conventional
Conventional
Program
Fast
Fast
4
4
Intensive
3
2
2
Eco
Eco
1
1
6 Vidro
wash and dry
wash and dry
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Conventional
Conventional
Program
Fast
4
Intensive
Intensive
3
3
2
2
Eco
Eco
1
1
7 Silencioso
wash and dry
wash and dry
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Conventional
Conventional
Sanitizing
5
Fast
Fast
4
4
Intensive
Intensive
3
3
2
Eco
2
1
8 Desinfeção
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
wash and dry
wash and dry
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
Pre-Wash
6
Conventional
Sanitizing
Sanitizing
5
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
5
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Fast
Fast
4
4
Intensive
Intensive
3
3
2
9 Pré-lavagem
wash and dry
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
Self-Clean
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
10 Limpeza
Fast
Fast
4
4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
Intensive
Pre-treatment of the dishes is not needed before any of the programs.
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
automática
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
address: dw_test_support@whirlpool.com
7
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
address: dw_test_support@whirlpool.com
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Fast
4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Os dados do programa ECO são avaliados em condições laboratoriais de acordo com a norma europeia EN 60436:2020.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
PROGRAMS DESCRIPTION
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Nota para os laboratórios de teste: para informações pormenorizadas sobre condições comparativas de teste EN, envie um email para o
Self-Clean
Self-Clean
7
7
Pre-Wash
address: dw_test_support@whirlpool.com
Pre-Wash
6
6
Sanitizing
5
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
seguinte endereço: dw_test_support@whirlpool.com
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Não é necessário efetuar qualquer tipo de pré-tratamento da loiça antes de iniciar os programas.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
Self-Clean
Self-Clean
*) Nem todas as opções podem ser utilizadas em simultâneo
7
7
address: dw_test_support@whirlpool.com
Pre-Wash
address: dw_test_support@whirlpool.com
6
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
**) Os valores fornecidos para os programas são meramente indicativos (à exceção do programa Eco). O tempo real poderá variar
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
dependendo de vários fatores, tais como a temperatura e a pressão da água de entrada, a temperatura ambiente, a quantidade de
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
Self-Clean
PROGRAMS DESCRIPTION
7
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
detergente, a quantidade e o tipo de carga, o equilíbrio da carga, as opções adicionais selecionadas e a calibragem do sensor.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
1. ECO - O programa Eco é recomendado para a lavagem de loiça com um nível de sujidade normal, sendo o programa mais eficiente no que
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
respeita à combinação do consumo de água e de energia para este tipo de loiça. Além disso, está em conformidade com os regulamentos de
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
design ecológico da UE.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
2. Auto - Para loiça com um nível de sujidade normal, contendo resíduos de comida ressequidos. Deteta o nível de sujidade da loiça e ajusta o programa.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
address: dw_test_support@whirlpool.com
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Quando o sensor está ativado para detetar o nível de sujidade da loiça, é apresentada uma animação no visor e a duração do ciclo é atualizada.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
3. INTENSO - Programa aconselhado para loiça muito suja, sendo particularmente indicado para tachos e panelas (não deve ser utilizado para
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
objetos frágeis).
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
4. LAVAGEM RÁPIDA 30' - Programa a ser utilizado para meia carga de loiça ou loiça com sujidade ligeira, sem resíduos de comida ressequidos.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Não inclui uma fase de secagem.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
5. LAVAGEM E SECAGEM RÁPIDAS - Loiça com um grau de sujidade normal. Ciclo diário, que garante um desempenho de limpeza e secagem
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ideais num período de tempo mais curto.
PROGRAMS DESCRIPTION
6. VIDRO - Programa para objetos frágeis e mais sensíveis a temperaturas elevadas, tais como copos e chávenas de vidro.
7. SILENCIOSO Adequado para um funcionamento noturno da máquina. Garante um desempenho de limpeza e secagem ideais com a menor
emissão menor de ruído possível.
8. DESINFEÇÃO - Programa para loiça com nível normal de sujidade ou loiça muito suja com fase adicional de lavagem antibacteriana.
Programa a utilizar para efetuar a manutenção da máquina de lavar loiça.
9. PRÉ-LAVAGEM - Utilizado para refrescar a loiça a ser lavada mais tarde. Neste programa não é utilizado detergente.
10. LIMPEZA AUTOMÁTICA - Programa a ser utilizado para efetuar a manutenção da máquina de lavar loiça, a ser efetuado apenas quando a
máquina de lavar loiça estiver VAZIA e utilizando detergentes específicos concebidos para a manutenção de máquinas de lavar loiça.
Modificar um programa que está em execução
Se tiver sido selecionado um programa incorreto, é possível mudá-lo, desde que o mesmo tenha começado há pouco tempo: abra a porta,
prima sem soltar o botão LIGAR/DESLIGAR e a máquina desliga-se. Volte a ligar a máquina utilizando o botão LIGAR/DESLIGAR e selecione um
novo ciclo de lavagem e as opções pretendidas; inicie o ciclo premindo o botão INÍCIO/PAUSA e fechando a porta no espaço de 4 segundos.
Se demorar mais de 4 segundos, a máquina parará automaticamente e será necessário reiniciar a máquina novamente, repetindo a última operação.
Adicionar mais loiça
Sem desligar a máquina, abra a porta (o LED INÍCIO/PAUSA) começará a piscar) (tenha cuidado com o vapor quente!) e coloque a loiça no interior da
máquina. Prima o botão INÍCIO/PAUSA e feche a porta no espaço de 4 segundos para retomar o ciclo no ponto em que foi interrompido.
Interrupções acidentais
Se a porta for aberta durante o ciclo de lavagem, ou se houver um corte de energia, o ciclo pausa. Prima o botão INÍCIO/PAUSA e feche a
porta no espaço de 4 segundos para retomar o ciclo no ponto em que foi interrompido.
Program
Program
50°
50°
50°
55°
55°
Program
50°
50°
50-60°
65°
65°
-
55°
55°
Program
50°
50°
65°
-
-
50°
50°
-
65°
65°
-
Program
55°
55°
50°
50°
-
65°
65°
-
-
-
50°
50°
-
Program
65°
65°
-
55°
50°
50°
50°
-
-
-
-
-
65°
65°
-
-
-
Program
50°
50°
-
65°
55°
55°
50°
50°
45°
-
-
65°
65°
-
-
-
-
-
-
65°
65°
-
-
50°
65°
65°
-
55°
55°
50°
50°
50°
-
-
65°
65°
-
-
-
-
-
-
65°
-
-
50°
50°
-
65°
65°
-
55°
55°
50°
65°
-
-
-
65°
65°
-
-
-
65°
65°
-
-
-
50°
50°
-
65°
65°
-
55°
-
-
-
-
65°
-
-
-
-
-
65°
65°
-
-
-
50°
50°
-
65°
-
65°
-
-
-
-
65°
65°
-
-
-
-
-
-
65°
65°
-
-
50°
-
-
-
65°
65°
-
-
-
-
-
-
65°
-
-
-
65°
65°
-
-
-
-
-
65°
-
NaturalDry
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
NaturalDry
NaturalDry
E
E
d
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
– enabled
ensure exceptional drying performance every day. Door opens at
– enabled
– disabled
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
press and hold
press and hold
button (3 sec).
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
NaturalDry
NaturalDry
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
E
E
d
– enabled
– enabled
– disabled
button (6 sec).
button (6 sec).
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
press and hold
press and hold
button (3 sec).
NaturalDry
NaturalDry
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
E
E
d
– enabled
– enabled
Duration of
– disabled
Duration of
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
Funções
Available
Available
2. You switched to NaturalDry Control Menu, you could change
wash pro-
wash pro-
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
NaturalDry
press and hold
press and hold
button (3 sec).
disponíveis (*)
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
options
ensure exceptional drying performance every day. Door opens at
options
ensure exceptional drying performance every day. Door opens at
gram
*)
*)
E
– enabled
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture.
Duration of
Duration of
(h:min)
(h:min)
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
Available
Available
wash pro-
wash pro-
press and hold
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec-
2:45
options
options
gram
*)
*)
E
E
d
– enabled
– enabled
– disabled
button (6 sec).
button (6 sec).
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
(h:min)
(h:min)
Duration of
Duration of
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is
Available
Available
wash pro-
wash pro-
press and hold
press and hold
button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
2:00
2:45
E
E
d
options
options
gram
button (6 sec).
– enabled
*)
button (6 sec).
– enabled
*)
– disabled
tion foil please refer to (INSTALLATION GUIDE).
Duration of
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
(h:min)
(h:min)
NaturalDry functionality could be disabled by the user as follows:
-
Available
button (3 sec).
2:30
wash pro-
press and hold
status of NaturalDry functionality by pressing
press and hold
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
2:00
E
E
d
– enabled
– enabled
– disabled
button (6 sec).
options
2:45
*)
Duration of
Duration of
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
(h:min)
-
0:55
Available
Available
wash pro-
wash pro-
press and hold
status of NaturalDry functionality by pressing
press and hold
button (3 sec).
-
2:30
E
d
2:00
– enabled
– disabled
options
options
gram
*)
*)
Duration of
Duration of
To confirm the change and exit from the Control Menu please
(h:min)
(h:min)
-
1:40
Available
Available
wash pro-
wash pro-
press and hold
button (3 sec).
-
0:55
-
2:30
options
options
gram
*)
*)
2:45
Duration of
Duration of
(h:min)
(h:min)
-
0:10
-
Available
Available
wash pro-
1:40
wash pro-
-
0:55
-
options
options
gram
2:00
*)
*)
2:45
Duration of
-
(h:min)
0:50
(h:min)
-
0:10
Available
wash pro-
-
1:40
-
-
2:30
2:00
options
gram
*)
2:45
(h:min)
-
0:50
-
0:10
-
-
0:55
-
2:30
2:00
2:45
0:50
-
-
-
1:40
-
0:55
-
2:30
2:00
-
-
0:10
-
1:40
-
0:55
2:30
-
0:50
-
0:10
-
1:40
0:55
-
0:50
-
0:10
1:40
0:50
-
0:10
0:50
button:
d
– disabled
button (3 sec).
button:
d
– disabled
button (3 sec).
button:
d
– disabled
Duração do
Consumo
Water
Water
Energy
programa de
de água
consumption
consumption
consumption
button (3 sec).
lavagem
gram
(litros/ciclo)
(litres/cycle)
(litres/cycle)
(kWh/cycle)
d
(h:min)**)
– disabled
**)
**)
Water
Water
Energy
consumption
consumption
consumption
button (3 sec).
button:
2:45
12.0
12.0
0.92
3:10
9,5
gram
d
– disabled
(litres/cycle)
(litres/cycle)
(kWh/cycle)
**)
**)
Water
Water
Energy
button (3 sec).
button:
2:00
15.0
15.0
1.35
consumption
consumption
consumption
2:45
12.0
12.0
0.92
1:25 - 3:00
7,0 - 14,0
d
gram
– disabled
(litres/cycle)
(litres/cycle)
(kWh/cycle)
**)
**)
Water
button (3 sec).
2:30
15.0
15.0
1.50
button:
2:00
15.0
15.0
1.35
consumption
d
– disabled
gram
2:45
12.0
12.0
0.92
2:50
14,0
(litres/cycle)
**)
Water
Water
Energy
0:55
11.5
11.5
1.10
button (3 sec).
button:
2:30
15.0
15.0
1.50
consumption
consumption
consumption
2:00
15.0
15.0
1.35
gram
2:45
12.0
0:30
9,0
(litres/cycle)
(litres/cycle)
(kWh/cycle)
**)
**)
Water
Water
Energy
1:40
11.5
11.5
1.30
0:55
11.5
11.5
1.10
consumption
consumption
consumption
2:30
15.0
15.0
1.50
gram
2:00
15.0
2:45
12.0
12.0
0.92
1:25
11,5
(litres/cycle)
(litres/cycle)
(kWh/cycle)
**)
**)
0:10
Water
4.5
Water
4.5
Energy
0.01
1:40
11.5
11.5
1.30
consumption
consumption
consumption
0:55
11.5
11.5
1.10
2:30
15.0
gram
2:00
15.0
15.0
1.35
2:45
12.0
12.0
0.92
1:40
11,5
(litres/cycle)
(litres/cycle)
(kWh/cycle)
0:50
8.0
8.0
0.80
**)
**)
Water
Energy
0:10
4.5
4.5
0.01
1:40
11.5
11.5
1.30
consumption
consumption
0:55
11.5
2:30
15.0
15.0
1.50
2:00
15.0
15.0
1.35
2:45
12.0
12.0
0.92
3:30
15,0
(litres/cycle)
(kWh/cycle)
**)
0:50
8.0
8.0
0.80
0:10
4.5
4.5
0.01
1:40
11.5
0:55
11.5
11.5
1.10
2:30
15.0
15.0
1.50
2:00
15.0
15.0
1.35
12.0
0.92
1:40
10,0
0:50
8.0
8.0
0.80
0:10
4.5
1:40
11.5
11.5
1.30
0:55
11.5
11.5
1.10
2:30
15.0
15.0
1.50
15.0
1.35
0:12
4,5
0:50
8.0
0:10
4.5
4.5
0.01
1:40
11.5
11.5
1.30
0:55
11.5
11.5
1.10
15.0
1.50
0:50
8,0
0:50
8.0
8.0
0.80
0:10
4.5
4.5
0.01
1:40
11.5
11.5
1.30
11.5
1.10
0:50
8.0
8.0
0.80
0:10
4.5
4.5
0.01
11.5
1.30
0:50
8.0
8.0
0.80
4.5
0.01
8.0
0.80
9
9
9
9
13
button:
9
button:
button:
Consumo
Energy
de energia
consumption
button:
(kWh/ciclo)
(kWh/cycle)
Energy
consumption
button:
0.92
0,85
(kWh/cycle)
Energy
button:
1.35
consumption
0.92
0.90 - 1,40
(kWh/cycle)
Energy
1.50
button:
1.35
consumption
0.92
1,50
(kWh/cycle)
Energy
1.10
1.50
consumption
1.35
0.92
0,50
(kWh/cycle)
Energy
1.30
1.10
consumption
1.50
1.35
0.92
1,10
(kWh/cycle)
Energy
0.01
1.30
consumption
1.10
1.50
1.35
0.92
1,20
(kWh/cycle)
0.80
0.01
1.30
1.10
1.50
1.35
0.92
1,15
0.80
0.01
1.30
1.10
1.50
1.35
1,30
0.80
0.01
1.30
1.10
1.50
0,01
0.80
0.01
1.30
1.10
0,85
0.80
0.01
1.30
0.80
0.01
0.80
Publicidad
