Publicidad
Idiomas disponibles
Idiomas disponibles
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
of time between 1 and 12 hours.
of time between 1 and 12 hours.
ENGLISH
ENGLISH
will begin counting down.
will begin counting down.
DELAY
the selected wash cycle will be increased.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
appears on the display; each time you press the button,
switches off and the wash cycle begins.
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH
ENGLISH
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
DELAY
DELAY
ESPAÑOL
will begin counting down.
will begin counting down.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
switches off and the wash cycle begins.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
ENGLISH
the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY
«h» switches off.
DELAY
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
will begin counting down.
will begin counting down.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
has been started.
has been started.
of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
of time between 1 and 12 hours.
Tabla de programas
switches off and the wash cycle begins.
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
DELAY
DELAY
«h» switches off.
«h» switches off.
To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol
To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
will begin counting down.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button
appears on the display; each time you press the button,
press the DELAY button. To cancel it, press the button
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
3. Once this time has elapsed, the indicator light «h»
has been started.
has been started.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light
button and within 4 seconds close the door: the timer
the time (1h, 2h, etc. up to max. 12h) from the start of
switches off and the wash cycle begins.
DELAY
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
«h» switches off.
will begin counting down.
the selected wash cycle will be increased.
«h» switches off.
the selected wash cycle will be increased.
will begin counting down.
To adjust the delay time and select a shorter period of time,
The start time of the program may be delayed for a period
The DELAY function cannot be set once a wash cycle
appears on the display; each time you press the button,
The DELAY function cannot be set once a wash cycle
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
Programa
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button
Program
Program
of time between 1 and 12 hours.
has been started.
the time (1h, 2h, etc. up to max. 12h) from the start of
has been started.
the time (1h, 2h, etc. up to max. 12h) from the start of
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
the selected wash cycle will be increased.
To adjust the delay time and select a shorter period of time,
will begin counting down.
To adjust the delay time and select a shorter period of time,
will begin counting down.
«h» switches off.
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Program
Program
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
has been started.
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
Eco
Eco
1 Eco
1
1
the selected wash cycle will be increased.
will begin counting down.
will begin counting down.
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Conventional
Conventional
button and within 4 seconds close the door: the timer
2
switches off and the wash cycle begins.
2
switches off and the wash cycle begins.
has been started.
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
has been started.
Program
Program
Eco
Eco
1
1
2 Auto
wash and dry
wash and dry
will begin counting down.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
Conventional
Conventional
Intensive
Intensive
3
3
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
has been started.
repeatedly until the selected delayed start indicator light
has been started.
2
2
Program
Eco
wash and dry
wash and dry
Eco
1
1
3 Intensivo
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
Fast
Fast
4
4
has been started.
repeatedly until the selected delayed start indicator light
has been started.
Conventional
Intensive
Intensive
Conventional
3
3
Program
Program
2
2
Eco
«h» switches off.
1
4 Lavado rápido 30'
wash and dry
wash and dry
The DELAY function cannot be set once a wash cycle
Sanitizing
Sanitizing
5
5
Fast
Fast
4
4
has been started.
Conventional
Program
Program
5 Lavado y secado
Intensive
Intensive
3
3
Eco
2
Eco
1
1
wash and dry
rápido
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Conventional
Conventional
Program
Program
Fast
Fast
4
4
Intensive
3
2
2
1
Eco
1
Eco
6 Vidrio
wash and dry
wash and dry
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Conventional
Conventional
Program
Fast
4
Intensive
Intensive
3
3
2
2
Eco
Eco
1
1
7 Silent
wash and dry
wash and dry
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Conventional
Conventional
Sanitizing
5
Fast
Fast
4
4
Intensive
Intensive
3
3
2
2
Eco
1
8 Desinfección
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
wash and dry
wash and dry
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
Pre-Wash
6
Conventional
Sanitizing
Sanitizing
5
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
5
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Fast
Fast
4
4
Intensive
Intensive
3
3
2
9 Prelavado
wash and dry
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Fast
Fast
4
4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
Intensive
Pre-treatment of the dishes is not needed before any of the programs.
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
10 Autolimpieza
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
address: dw_test_support@whirlpool.com
7
address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Los datos del programa ECO se miden bajo condiciones de laboratorio de conformidad con la Norma europea EN 60436:2020.
Fast
4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Nota para laboratorios de prueba: Para obtener información sobre las condiciones de la prueba EN comparativa, envíe un correo electrónico a
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
la siguiente dirección: dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
6
Pre-Wash
6
address: dw_test_support@whirlpool.com
Pre-Wash
5
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Sanitizing
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
No es necesario ningún tratamiento previo de la vajilla antes de ninguno de los programas.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) No todas las opciones se pueden utilizar simultáneamente
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
Self-Clean
Self-Clean
7
7
address: dw_test_support@whirlpool.com
Pre-Wash
address: dw_test_support@whirlpool.com
6
**) Los valores indicados para los programas distintos al programa Eco son indicativos. El tiempo real puede variar dependiendo de muchos
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factores como la temperatura y la presión del agua de entrada, la temperatura ambiente, la cantidad de detergente, la cantidad y el tipo de
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
carga, la colocación de la carga, las opciones adicionales seleccionadas y la calibración del sensor.
load, load balancing, additional selected options and sensor calibration.
Self-Clean
7
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
1. ECO: El programa Eco es adecuado para lavar utensilios con suciedad normal, para este uso es el programa más eficiente en términos
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
de consumo combinado de energía y agua, y se utiliza para valorar el cumplimiento con la legislación de Ecodiseño de la UE.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
PROGRAMS DESCRIPTION
2. Auto - Para vajilla con suciedad normal con residuos de comida secos. Detecta el nivel de suciedad en la vajilla y ajusta el programa
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
según proceda. Cuando el sensor está detectando el nivel de suciedad, aparece una animación en la pantalla y se actualiza la
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
duración del ciclo.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
3. INTENSIVO - Programa recomendado para vajilla muy sucia, en especial para ollas o sartenes (no se debe utilizar para artículos
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
delicados).
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
4. LAVADO RÁPIDO 30' - Programa recomendado para media carga de vajilla poco sucia sin restos de comida secos. No incluye fase de
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
secado.
load, load balancing, additional selected options and sensor calibration.
5. LAVADO Y SECADO RÁPIDO- Vajilla con suciedad normal. Ciclo diario que garantiza un rendimiento de limpieza y secado óptimos en
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
poco tiempo.
6. VIDRIO - Programa para vajilla delicada sensible a altas temperaturas como vasos o tazas.
PROGRAMS DESCRIPTION
7. SILENT - Adecuado para hacer funcionar el dispositivo de noche. Garantiza una limpieza y un secado óptimos con las más bajas
emisiones de ruido.
8. DESINFECCIÓN: Vajilla con suciedad normal o muy sucia, con acción antibacteriana suplementaria. Puede utilizarse para realizar el
mantenimiento del lavavajillas.
9. PRELAVADO: Se utiliza para remojar la vajilla que planea lavar más tarde. Con este programa no se debe utilizar detergente.
10. SELF-CLEAN - Programa para realizar el mantenimiento del lavavajillas. Solo debe llevarse a cabo cuando el lavavajillas esté VACÍO
usando detergentes específicos diseñados para el mantenimiento de lavavajillas.
Modificación de un programa en curso
Si se ha equivocado al seleccionar el programa, se puede cambiar, siempre que acabe de empezar: abra la puerta, mantenga pulsado el botón
ENCENDIDO/APAGADO; la máquina se apagará. Vuelva a encender la máquina con el botón ENCENDIDO/APAGADO y seleccione el nuevo ciclo
de lavado y cualquier opción que se desee; Inicie el ciclo de lavado pulsando el botón INICIO/Pausa y cerrando la puerta en un plazo de 4 seg.
Si tarda más de 4 segundos, el aparato se detiene automáticamente y debe reiniciarlo de nuevo repitiendo la última operación.
Añadir más vajilla
Abra la puerta sin apagar el aparato (el led de INICIO/Pausa empieza a parpadear) (¡cuidado con el valor CALIENTE!) y ponga la vajilla dentro del
lavavajillas. Pulse el botón INICIO/Pausa y cierre la puerta en un plazo de 4 seg; el ciclo se reanudará desde el punto en el cual se interrumpió.
Interrupciones accidentales
Si se abre la puerta durante el ciclo de lavado, o si hay un corte de corriente, el ciclo se pausa. Pulse el botón INICIO/Pausa y cierre la puerta en
un plazo de 4 seg; el ciclo se reanudará desde el punto en el cual se interrumpió.
Available
disponibles (*)
options
Available
50°
50°
50°
options
Available
55°
55°
50°
50°
50-60°
options
65°
65°
-
-
55°
55°
50°
50°
65°
-
-
50°
50°
-
-
Available
65°
65°
-
-
55°
55°
options
50°
50°
-
65°
65°
-
-
Available
-
-
50°
50°
-
-
65°
65°
-
-
55°
options
50°
50°
50°
-
-
-
-
-
-
65°
65°
-
-
Available
-
-
50°
50°
-
-
65°
-
55°
55°
options
50°
50°
45°
-
-
65°
65°
-
-
-
-
-
-
-
-
Available
65°
65°
-
-
-
50°
-
65°
65°
-
-
55°
55°
options
50°
50°
50°
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
-
-
-
50°
50°
-
-
65°
65°
-
-
55°
55°
50°
65°
-
-
-
65°
65°
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
65°
65°
-
-
55°
-
-
-
-
65°
-
-
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
65°
-
65°
-
-
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
65°
-
-
-
50°
-
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
-
-
-
65°
65°
-
-
-
-
-
-
65°
-
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
NaturalDry
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
NaturalDry
NaturalDry
added together with the dishwasher. To see how to mount protec-
E
added together with the dishwasher. To see how to mount protec-
E
d
d
– enabled
ensure exceptional drying performance every day. Door opens at
– enabled
– disabled
– disabled
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
press and hold
press and hold
As additional steam protection, special designed protection foil is
button (3 sec).
button (3 sec).
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
NaturalDry
NaturalDry
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
E
E
d
d
– enabled
– enabled
– disabled
– disabled
button (6 sec).
button (6 sec).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
press and hold
press and hold
button (3 sec).
button (3 sec).
NaturalDry
NaturalDry
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
Duración del
E
E
d
d
– enabled
– enabled
Duration of
– disabled
Duration of
– disabled
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
Funciones
programa de
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows:
Available
NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change
wash pro-
wash pro-
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
consumption
lavado
NaturalDry
press and hold
press and hold
button (3 sec).
button (3 sec).
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
options
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec-
gram
gram
*)
*)
(litres/cycle)
E
d
(h:min)**)
– enabled
– disabled
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture.
Duration of
Duration of
(h:min)
(h:min)
**)
**)
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
Available
wash pro-
wash pro-
consumption
press and hold
button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec-
2:45
2:45
options
gram
gram
*)
*)
E
E
d
d
– enabled
– enabled
– disabled
– disabled
(litres/cycle)
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
the temperature that is safe to your kitchen furniture.
(h:min)
(h:min)
Duration of
Duration of
**)
**)
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
Available
wash pro-
wash pro-
press and hold
press and hold
button (3 sec).
button (3 sec).
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding
2:00
2:00
consumption
2:45
2:45
1:25 - 3:00
E
E
d
d
options
gram
gram
button (6 sec).
– enabled
*)
button (6 sec).
– enabled
*)
– disabled
– disabled
tion foil please refer to (INSTALLATION GUIDE).
(litres/cycle)
Duration of
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
2. You switched to NaturalDry Control Menu, you could change
(h:min)
(h:min)
**)
**)
Available
2:30
wash pro-
2:30
press and hold
status of NaturalDry functionality by pressing
press and hold
status of NaturalDry functionality by pressing
button (3 sec).
button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
2:00
2:00
E
E
d
d
button (6 sec).
– enabled
– enabled
– disabled
– disabled
options
2:45
gram
2:45
*)
Duration of
Duration of
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
(h:min)
**)
0:55
0:55
Available
wash pro-
wash pro-
press and hold
status of NaturalDry functionality by pressing
press and hold
button (3 sec).
button (3 sec).
2:30
2:30
consumption
E
d
2:00
2:00
– enabled
– disabled
options
gram
gram
*)
*)
2:45
(litres/cycle)
Duration of
Duration of
To confirm the change and exit from the Control Menu please
(h:min)
(h:min)
**)
**)
1:40
1:40
Available
wash pro-
wash pro-
press and hold
button (3 sec).
0:55
0:55
consumption
2:30
2:30
options
gram
gram
2:00
*)
*)
2:45
2:45
(litres/cycle)
Duration of
Duration of
(h:min)
(h:min)
**)
**)
0:10
0:10
1:40
1:40
Available
wash pro-
wash pro-
consumption
0:55
0:55
2:30
options
gram
2:00
gram
2:00
*)
*)
2:45
2:45
(litres/cycle)
Duration of
(h:min)
0:50
(h:min)
0:50
**)
**)
0:10
0:10
wash pro-
1:40
1:40
consumption
0:55
2:30
2:30
2:00
2:00
gram
*)
2:45
2:45
(litres/cycle)
(h:min)
**)
0:50
0:50
0:10
0:10
1:40
0:55
0:55
2:30
2:30
2:00
2:00
2:45
0:50
0:50
0:10
1:40
1:40
0:55
0:55
2:30
2:30
2:00
0:50
0:10
0:10
1:40
1:40
0:55
0:55
2:30
0:50
0:50
0:10
0:10
1:40
1:40
0:55
0:50
0:50
0:10
0:10
1:40
0:50
0:50
0:10
0:50
9
9
button:
button:
9
button:
button:
button:
button:
Consumo
Water
Water
Energy
Energy
de agua
consumption
consumption
consumption
button:
(litros/ciclo)
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Water
Energy
Energy
consumption
consumption
consumption
button:
button:
12.0
12.0
0.92
0.92
3:10
9,5
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Water
Energy
Energy
button:
button:
15.0
15.0
1.35
1.35
consumption
consumption
consumption
12.0
12.0
0.92
0.92
7,0 - 14,0
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Energy
15.0
15.0
1.50
1.50
button:
button:
15.0
15.0
1.35
1.35
consumption
consumption
12.0
12.0
0.92
0.92
2:50
14,0
(litres/cycle)
(kWh/cycle)
Water
Water
Energy
Energy
11.5
11.5
1.10
1.10
button:
15.0
15.0
1.50
1.50
consumption
consumption
consumption
15.0
15.0
1.35
1.35
12.0
0.92
0:30
9,0
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Water
Energy
Energy
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
consumption
consumption
consumption
15.0
15.0
1.50
1.50
15.0
1.35
12.0
12.0
0.92
0.92
1:25
11,5
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
4.5
Water
4.5
Energy
0.01
Energy
0.01
11.5
11.5
1.30
1.30
consumption
consumption
consumption
11.5
11.5
1.10
1.10
15.0
1.50
15.0
15.0
1.35
1.35
12.0
12.0
0.92
0.92
1:40
11,5
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
8.0
8.0
0.80
0.80
Water
Energy
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
consumption
11.5
1.10
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
12.0
12.0
0.92
0.92
3:30
15,0
(kWh/cycle)
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
1.30
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
12.0
0.92
1:40
10,0
8.0
8.0
0.80
0.80
4.5
0.01
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
1.35
0:12
4,5
8.0
0.80
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
15.0
1.50
0:50
8,0
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
11.5
1.10
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
1.30
8.0
8.0
0.80
0.80
4.5
0.01
8.0
0.80
9
9
28
Consumo
energético
(kWh/ciclo)
0.85
0.90 - 1,40
1,50
0,50
1,10
1,20
1,15
1,30
0,01
0.85
Publicidad
