Publicidad
PACKAGE CONTENTS
EN
(1) AXIS Shoulder Joint
(1) 0.050˝ hex key
(1) 0.156˝ hex key
(1) 0.125" Drill Bit
This diagram (Figure 1) is to help familiarize you with the unique parts of the AXIS. These parts are referenced in the instructions and used when speaking with a technical service representative.
Key Components (Figure 1)
A.
Exoskeletal Humeral Plate
F.
Size Mounting Ring
AXIS Part Number Mounting Type
SJ90 BK
Exoskeletal
SJ100 BK
Endoskeletal
SJ92 BK
Exoskeletal
SJ102 BK
Endoskeletal
(10) M3 0.5 x 20 mm PH FL screws
(10) M3 0.5 x 30mm PH FL screws
(1) SJ90 Mounting Ring
(1) 0.062˝ hex key
(1) 3mm hex key
(1) T10 Torx Key
(1) SS Roll Pin ( 0.125" x 0.250")
B.
C.
Abduction Friction Adjustment
Yoke Plate
G.
H.
T10 Torx Humeral Plate Fasteners
Tube Clamp (Endo Model)
Lock Actuator
Manual
Manual
Electronic
Electronic
TOOLS REQUIRED
3mm drill bit
#1 Phillips head screwdriver
ENDO ONLY
Torque wrench
D.
Mechanical Locking Mechanism
I.
Endo Tube (Endo Model)
PRODUCT DESCRIPTION
The Axis Locking Shoulder Joint is constructed with an exoskeletal or endoskeletal mounting option,
and a mechanical or electronic lock option. It includes a mounting ring and ten mounting fasteners.
INTENDED USE
The Axis Shoulder Joint is a device intended to replace one or more functions of the biological human
shoulder joint for upper limb amputees.
14mm drill bit
E.
Electronic Locking Mechanism
(Electric Model)
Publicidad
