Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
The information contained in this Instruction Manual is designed to assist you in the safe operation and
maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safey
instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that differ from those on your
own power tool.
NAME OF PARTS
Collet chuck
Spindle
SPECIFICATIONS
Motor
Power Source
Current
No-Load Speed
Max. Wheel Diam.
Collet Check Capacity
Weight (without cord)
WARNING:
NEVER use an abrasive wheel, cutting wheel, or any wheel greater than 1" in diameter. Using such wheels
can result in wheel breakage, and will otherwise increase the risk of bodily injury from contact with the
wheel or wheel fragments.
FUNCTIONAL DESCRIPTION
Bearing lid (B)
Nose bracket
Single-Phase, Series Commutator Motor
Single-Phase, 120 V AC 60 Hz
4.7 A
29,000 / min
1" (25 mm)
1/4" (6.35 mm)
3.7 lbs (1.7 kg)
Switch
Tail cover
Housing
Inner cover (B)
Fig. 1
English
7
Publicidad
Tabla de contenido
